HS Phoenix XeRun V2.1 120A ESC Sensored Brushless Turbo Compatible Hobbywing for 1/10 1/12 on-road off-road RC Rally Buggy

SELAMAT DATANG DITOKO SAYA. Untuk kualiatas produknya pastinya terjamin asli bukan kw. Harga dan Stock bisa berubah sewaktu waktu. Mohon Chat Admin Toko saya terlebih dahulu sebelum Order yaa..
Model Number : Original XeRun Stock Spec V3.1
Size : 1/10 1/12
Material : Composite Material
Origin : Mainland China
Use : Vehicles & Remote Control Toys
Wheelbase : Bottom Plate
RC Parts & Accs : Speed Controllers
For Vehicle Type : Cars
Tool Supplies : Assembled class
Technical parameters : Value 2
Four-wheel Drive Attributes : Assemblage
Upgrade Parts/Accessories : Frame
Remote Control Peripherals/Devices : ESC
Recommend Age : 14+y
Is Electric : No battery
Name: Fire Phoenix 120A Sensory Brushless ESC
Internal resistance: 0.0003
Voltage: 2-4S lithium battery, 5-12 section Ni-MH battery
Inductive motor: support
Can turn on Turbo
Continuous current/peak current: 120A/760A
BEC output: 6V/5A or 7.4V/5A (short-circuit solder joints can be switched) [when switched to 7.4V, it can only support 2s-3s]
Hobbywing setting card: compatible;
SET programming key: compatible
Motor: inductive motor/non-inductive motor
Weight: 94g
ESC size: length 43mm*width 32mm*height 37mm
Applicable models: 1/10 and below all series, 1/8 climbing
Operating mode:
Forward and reverse with brake (practice mode)
Forward rotation with brake (race mode)
Direct forward and reverse (climbing mode)
Protection function: multiple protections for low pressure, overheating, out of control, and blockage
1. This ESC supports sensored brushless motors and sensorless brushless motors;
2. This ESC is not waterproof, please do not use it in water.
3. ESC uses the V1 program by default and can be upgraded to the V3 program using the settings card.
The difference between V1 program and V3 program:
V1 can use 4s lipo battery. V3 cannot
V1 can use the Set setting key. V3 cannot
V1 can use the LED simple setting card. V3 cannot
V1 cannot use Turbo. V3 can.
V1 cannot use 4-pole inductive motors. V3 can.
Additional instructions for the upgraded version:
1: The fan has intelligent temperature control, and it detects the fan after turning it on for a few seconds to determine whether the fan is good or bad. The fans are powered by BEC. The temperature control system is on the circuit board inside and detects the temperature on the circuit board. At 6V BEC, the fan starts to rotate when the temperature reaches 42 degrees, and reaches its maximum speed after 48 degrees. When the temperature reaches 38 degrees at 7.4V BEC, the fan starts to rotate, and reaches its maximum speed after 44 degrees.
2: BEC is a switch BEC with 5A output, and the voltage is available in 6V and 7.4V.
Switch the UBEC voltage: short the two contacts of BEC on the ESC to switch