Atur jumlah dan catatan
Stok Total: 9857
Subtotal
Rp225.000
IP2368 Bidirectional 100w Fast Charging Module Buck-Boost Type-c Interface 4S Lithium Battery High-Power Fast Charging Board
Rp225.000
- Kondisi: Baru
- Waktu Preorder: 30 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
The two-way c port of the product can only be connected to one-way electrical appliances or chargers, such as charging heads, mobile phones and other electrical appliances. Do not link a bidirectional c port to a module with a bidirectional c port. As a result, frequent switching between modules may fail to be identified and serious damage may occur. Note a problem, any charge and discharge module, if you use the power supply as a battery, can only test the output, can not charge the module. There is a risk of backfilling
Product selling points:
1. The product is made of high quality material, quality is guaranteed
2.The module has the function of bidirectional voltage rise and fall, no matter the battery voltage change can also output fixed 5v or 20v.
3. The product design is lightweight and adopts TYPE-C USB interface, which is convenient to use.
4.Almost support all fast charging protocols on the market.
5.IP2368 full protocol 100W fast charging output, the output not only supports laptop computers but also allows almost all cell phone fast charging protocols fast charging protocols
Product parameters:
Continuous operating current:18A
Overcharge voltage: 4.235V0.025V
Instantaneous current:30A
Overcharge discharge voltage: 4.190.05V
Charging voltage:16.8-17V
Over discharge voltage:2.8+0.08V
Charging current:1-10A
Over-discharge discharge voltage:3.0+0.1V
Balance starting voltage:4.190.05V
Product Information:
Name: IP2368 Bidirectional 100w Fast Charging Module
Product main control IC: IP2368
Power supply voltage: 4 strings of lithium batteries (you can modify the resistance to support 2-6 strings of lithium batteries or iron phosphate batteries), the battery pack is required to discharge capacity > 5a, the battery pack must be used with a protective plate;
Hole center distance 43.5*28.5mm(4 holes for M2 screw)
Product Notes:
The bidirectional c-port of the product can only be connected to one-way appliances or chargers, such as charging heads, cell phones
Product selling points:
1. The product is made of high quality material, quality is guaranteed
2.The module has the function of bidirectional voltage rise and fall, no matter the battery voltage change can also output fixed 5v or 20v.
3. The product design is lightweight and adopts TYPE-C USB interface, which is convenient to use.
4.Almost support all fast charging protocols on the market.
5.IP2368 full protocol 100W fast charging output, the output not only supports laptop computers but also allows almost all cell phone fast charging protocols fast charging protocols
Product parameters:
Continuous operating current:18A
Overcharge voltage: 4.235V0.025V
Instantaneous current:30A
Overcharge discharge voltage: 4.190.05V
Charging voltage:16.8-17V
Over discharge voltage:2.8+0.08V
Charging current:1-10A
Over-discharge discharge voltage:3.0+0.1V
Balance starting voltage:4.190.05V
Product Information:
Name: IP2368 Bidirectional 100w Fast Charging Module
Product main control IC: IP2368
Power supply voltage: 4 strings of lithium batteries (you can modify the resistance to support 2-6 strings of lithium batteries or iron phosphate batteries), the battery pack is required to discharge capacity > 5a, the battery pack must be used with a protective plate;
Hole center distance 43.5*28.5mm(4 holes for M2 screw)
Product Notes:
The bidirectional c-port of the product can only be connected to one-way appliances or chargers, such as charging heads, cell phones
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan