ESP32 ESP32-CAM ESP32-CAM-MB WiFi Bluetooth Development Board Module with OV2640 Camera 2.0MP 8dBi Antenna IPEX to RP-SMA Cable

Selamat Datang Di Toko Kami Semua Barang PreOrder 20-30 Hari Selamat Belanja Package : DIP is_customized : Yes Model Number : ESP32 WIFI Bluetooth Module Operating Temperature : standard Dissipation Power : other Supply Voltage : 5V Application : Computer Condition : New Type : Voltage Regulator Brand Name : diymore Origin : Mainland China Model : OV2640 camera module SPI Flash : Default 32Mbit RAM : Internal 520KB + External 4M PSRAM Bluetooth version : Bluetooth 4.2 BR/EDR and BLE standard WiFi : 802.11 b/g/n/e/i Support interface : UART,SPI,I2C,PWM feature 1 : esp32 development board feature 2 : esp32 mini camera feature 3 : esp32 ethernet feature 4 : CH340G USB feature 5 : Bluetooth module feature 6 : esp32 shield ESP32-CAM ESP32-CAM-MB WiFi Bluetooth Development Board Module with OV2640 Camera 2.0MP 8dBi Antenna IPEX to RP-SMA Cable ESP32-CAM-MBCamera Module+USB to Serial Port CH340G Introduction: The HK-ESP32-CAM-MB module is a small camera module with a size of 39.8*27*. This module can work independently as the smallest system. A new WiFi+Bluetooth dual-mode development board based on ESP32 design, using PCB on-board antenna, with 2 high-performance 32-bit LX6CPU, using 7-level pipeline architecture, main frequency adjustment range 80MHz to 240Mhz. Ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module HK-ESP32-CAM-MB adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions. Basic performance parameters: Using low-power dual-core 32-bit CPU, which can be used as an application processor. The main frequency is up to 240MHz, and the computing power is up to 600 DMIPS Built-in 520 KB SRAM, external 8MB PSRAM Support UART/SPI/I2C/PWM/ADC/DAC and other interfaces Support OV2640 and OV7670 cameras, built-in flash Support picture WiFI upload Support TF card Support multiple sleep modes. Lwip and FreeRTOS embedded Support STA/AP/STA+AP working mode Support Smart Config/AirKiss one-click network configuration Support secondary development Parameter: Working voltage: 4.75-5.25V SPIFlash: Default 32Mbit RAM: Internal 520KB + external 8MB PSRAM Wi-Fi: 802.11b/g/n/e/i Bluetooth: Bluetooth 4.2BR/EDR and BLE standard Support interface (2Mbps): UART, SPI, I2C, PWM Support TF card: maximum support 4G IO port: 9 Serial port rate: default 115200bps Spectrum range: 2400 ~2483.5MHz Antenna form: onboard PCB antenna, gain 2dBi Image output format: JPEG (only OV2640 support), BMP, GRAYSCALE Package method: DIP-16 Transmit power: 802.11b: 172dBm (@11Mbps) 802.11g: 142dBm (@54Mbps) 802.11n: 132dBm (@MCS7) Receiving sensitivity: CCK, 1Mbps: -90dBm CCK, 11Mbps: -85dBm 6Mbps(1/2BPSK): -88dBm 54Mbps(3/464-QAM): -70dBm MCS7 (65Mbps, 72.2Mbps): -67dBm Power consumption: Turn off the flash: 180mA@5V Turn on the flash and adjust the brightness to maximum: 310mA@5V Deep-sleep: The lowest power consumption can reach 6mA@5V Moderm-sleep: the lowest can reach 20mA@5V Light-sleep: the lowest can reach 6.7mA@5V Security WPA/WPA2/WPA2-Enterprise/WPS Working temperature: -20 ~ 70 Storage environment: -40 ~ 125 , lt;90%RH Weight: 10g Application scenarios: Image transmission of home smart devices Wireless monitoring Smart agriculture QR wireless recognition Wireless positioning system signal and other IoT applications ESP32-CAMCamera Module Description: Modle: ESP32-CAM Operating Voltage: 5V SPI Flash: 32 Mbit RAM: Inter 520KB+, External 4M PSRAM Bluetooth: BLuetooth 4.2 BR/EDR amp; BLE standard WIFI: 802.11/b/g/n/e/i Port: UART, SPI, I2C, PWM IO Port: 9 Serial port rate: 115200 bps Picture form: JPEG (only OV2640 support), BMP, GRAYSCALE Spectrum range: 2412 -2484MHz Antanna: Onboard PCB Antanna 2dBi Security: WPA/WPA2/WPA2-Enterprise/WPS Operating Temperature: -20 -85 Degrees Celsius Storage Tepmerature: -40 -90 Degrees Celsius, lt;90%RH Transmit power: 802.11b: 17+/-2 dBm (@11Mbps) 802.11g: 14+/-2 dBm (@54Mbps) 802.11n: 13+/-2 dBm (@MSC7) Receive Sensitivity: CCK, 1 Mbps: -90dBm CCK, 11 Mbps: -85dBm 6 Mbps(1/2 BPSK): -88dBm 54 Mbps (3/4 64-QAM): -70dBm MCS7 (65 Mbps, 72.2 Mbps): -67dBm ESP32-CAMCamera Module+Antenna+IPEX Cable Features: Low-power dual-core 32-bit CPU for application processors Main frequency up to 240MHz, computing power up to 600 DMIPS Built-in 520 KB SRAM, external 4M PSRAM Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC Support OV2640 and OV7670 cameras, built-in flash Support image WiFi upload Support TF card Support multiple sleep modes Embedded Lwip and FreeRTOS Support STA/AP/STA+AP working mode Support Smart Config/AirKiss one-click distribution network Support secondary development Description: The ESP32-CAM has a very competitive small form factor camera module that can operate independently as a minimum system with a footprint of only