BLDC Driver Controller 12V-36V DC 500W PWM Brushless Motor Hall Sensor

Modul Control BLDC Brushless motor dengan Hall Sensor Tegangan : 12 - 36 VDC Daya : max. 500w Dimensi : 64x42x17(mm) *stock READY, barang sesuai foto Operating voltage: DC 12V-36V Operating Current: lt;=15A Driver Power: lt;=500W Speed Voltage: 0.1V-5V Operating Temperature:-40-85C Humidity: 90%RH Stall protection:Yes Enable Control: Yes Over-current protection: Yes Steering control: Yes Speed control signal: Yes Power terminal Out: VCC(positive power supply) GND(negative one) MC(motor phases W) MB(motor phases V) MA(motor phase ) Set for the control side: GND control terminal ground VR the governor end 0-5V(corresponding to 10% of motor speed -100%) ZF reversing control(connected to 5V or ground can charge the motor rotation direction) M tachometer pulse output(depending on the number of motor poles corresponding to the number of pulse per revolution of the output number) EL enable control terminal(connected to 5V ot ground running then 5V, grounding the motor stops) 5V 5V control terminal HALL for the hall terminals: 5V, Hall power positive Ha, Hall signal Hb, Hall signal Hc, Hall Signal GND, Hall negative