VIFLY 1S Series Board Adapter (BT2.0 and PH2.0)

**NOTE Bukan Charger independen, tapi Series Board Adapter. Untuk ngecas Lipo 1S (BT2 atau PH2.) secara SERI. Bisa 1 - 6S Diatur dari knob. Proses pengecasan dicolok ke Charger digital masing2, contoh pada gambar menggunakan ISDT Q6 Nano Features: - Storage charge 1S LiPo batteries with standard charger. - Charge 1-6 batteries at the same time. - Turn the knob for the number of batteries you are charging. - The added fuse makes the board even safer. - Pre-soldered PH2.0 and BT2.0 connectors.   Warning: - It is series board not parallel board. For example, when you are charging 4pcs 300mAh lipos, set your charger to 0.3A for 1C or - 0.6A for 2C. NOT 1.2A or 2.4A. - The specs of all batteries should be the same, ie, battery capacity, battery type, brand, etc. - Never leave the board unattended while charging or discharging. - Do not charge over 1.5amps. The fuse is 5A that not means you can charge it in 5A, the knob is rated for 1.5A so don’t charge it over 1.5A. - Don’t plug in both PH2.0 and BT2.0 battery in the same port.