Atur jumlah dan catatan
Stok Total: Sisa 3
Subtotal
Rp19.889.000
Fein BOS 16-2 Two-Speed Hand Drill up to 16 mm Mesin Bor Baja
Rp19.889.000
- Kondisi: Baru
- Waktu Preorder: 30 Hari
- Min. Pemesanan: 1 Buah
- Etalase: WallCementPaintSetup
Mechanical two-speed gearbox for optimum speed adjustment for a wide range of uses.
FEIN high-power motor with good speed stability for constant drilling progress in almost any application.
Metal gear head and distortion-free barrel-type motor housing for superb service life.
Forward/reverse running and electronic speed preselection.
Speed-controlled tacho electronics.
High-precision metal drill chuck.
Self-tightening drill chuck clamping jaws.
Spade handle for optimum power transfer.
Variable speed control.
Tehnical Data:
Drilling Ø stainless steel 16 mm
Drilling Ø in wood 50 mm
Drilling Ø light metal 20 mm
Drill-Ø steel 16 mm
Drill-Ø steel hole saws 80 mm
Drill chuck range 3 - 16 mm
Torque at max.output power 50/16 Nm
Width across corners 27 mm
Weight according to EPTA 3.70 kg
Cable with plug 4 m
Countersink max. Ø 31 mm
Collar Ø 43 mm
Standstill torque 50/16 ** Nm (Torque slip clutch)
Power output 680 W.
Nominal consumption 1 200 W.
Load speed 0 - 520/0 - 1 600 1 / min
Idle speed 0 - 520/0 - 1 600 rpm
Tapping M 12
Thread on the drill shaft 1/2 in-20 UNF
FEIN high-power motor with good speed stability for constant drilling progress in almost any application.
Metal gear head and distortion-free barrel-type motor housing for superb service life.
Forward/reverse running and electronic speed preselection.
Speed-controlled tacho electronics.
High-precision metal drill chuck.
Self-tightening drill chuck clamping jaws.
Spade handle for optimum power transfer.
Variable speed control.
Tehnical Data:
Drilling Ø stainless steel 16 mm
Drilling Ø in wood 50 mm
Drilling Ø light metal 20 mm
Drill-Ø steel 16 mm
Drill-Ø steel hole saws 80 mm
Drill chuck range 3 - 16 mm
Torque at max.output power 50/16 Nm
Width across corners 27 mm
Weight according to EPTA 3.70 kg
Cable with plug 4 m
Countersink max. Ø 31 mm
Collar Ø 43 mm
Standstill torque 50/16 ** Nm (Torque slip clutch)
Power output 680 W.
Nominal consumption 1 200 W.
Load speed 0 - 520/0 - 1 600 1 / min
Idle speed 0 - 520/0 - 1 600 rpm
Tapping M 12
Thread on the drill shaft 1/2 in-20 UNF
Ada masalah dengan produk ini?
ULASAN PEMBELI

Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan