4.8/ 5.0
95% pembeli merasa puas
24 rating • 6 ulasan
5(22)91.67%
4(1)4.17%
3(0)0%
2(0)0%
1(1)4.17%
Atur jumlah dan catatan
Stok Total: 973
Subtotal
Rp6.250.000
Oscilloscope HANTEK DSO5102P Digital Storage DSO-5102P 100MHz 2 ch
Rp6.250.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Alat Ukur Listrik
- Dikirim dari Jakarta dengan box extra
The Hantek DSO5102P provides you with excellent performance in a compact design. It's loaded with standard features including USB connectivity, automated measurements, limit testing, data loading, and context-sensitive measurement that allow this digital storage oscilloscope to help you get more done in less time.
Hantek DSO5102P Specifications
100MHz bandwidth
1GSa/s Real Time sample rate
Large (7.0-inch) color display, WVGA(800x480)
Record length up to 40K
Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
USB host and device connectivity, standard (note: USB port is NOT intended to be used to recharge cell phones & other usb charged devices. )
Multiple automatic measurements
Four math functions, including FFTs standard
Provides software for PC real-time analysis
Acquisition modes: normal, peak detect, average
Inputs coupling: AC, DC, GND
Inputs impedance: 1MΩ±2% ‖ 20pF±3pF
Probe attenuation: 1X, 10X
Supported Probe Attenuation Factor: 1X, 10X, 100X, 1000X
Maximum input voltage: CAT I and CAT II: 300VRMS (10×), Installation Category CAT III: 150VRMS (1×) Installation Category II: derate at 20dB/decade above 100kHz to 13V peak AC at 3MHz* and above. For non-sinusoidal waveforms, peak value must be less than 450V. Excursion above 300V should be of less than 100ms duration. RMS signal level including all DC components removed through AC coupling must be limited to 300V. If these values are exceeded, damage to the oscilloscope may occur.
Sample rate range: 500MS/s--1GS/s
Waveform interpolation: (sin x)/x
Sample rate and delay time accuracy: ±50ppm(at over any ≥1ms time interval)
Position range: 20ns/div to 80us/div; (-8div x s/div) to 40ms; 200us/div to 40s/div; (-8div x s/div) to 400s
Rise time at BNC: 3.5ns
Math: +, -, *, /, FFT
FFT windows: Hanning, Flatop, Rectamgular, Bartlett, Blackman, 1024 sample point
Bandwidth limit: 20MHz
Low frequency response: (-3db) >≤10Hz at BNC
The Hantek DSO5102P provides you with excellent performance in a compact design. It's loaded with standard features including USB connectivity, automated measurements, limit testing, data loading, and context-sensitive measurement that allow this digital storage oscilloscope to help you get more done in less time.
Hantek DSO5102P Specifications
100MHz bandwidth
1GSa/s Real Time sample rate
Large (7.0-inch) color display, WVGA(800x480)
Record length up to 40K
Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
USB host and device connectivity, standard (note: USB port is NOT intended to be used to recharge cell phones & other usb charged devices. )
Multiple automatic measurements
Four math functions, including FFTs standard
Provides software for PC real-time analysis
Acquisition modes: normal, peak detect, average
Inputs coupling: AC, DC, GND
Inputs impedance: 1MΩ±2% ‖ 20pF±3pF
Probe attenuation: 1X, 10X
Supported Probe Attenuation Factor: 1X, 10X, 100X, 1000X
Maximum input voltage: CAT I and CAT II: 300VRMS (10×), Installation Category CAT III: 150VRMS (1×) Installation Category II: derate at 20dB/decade above 100kHz to 13V peak AC at 3MHz* and above. For non-sinusoidal waveforms, peak value must be less than 450V. Excursion above 300V should be of less than 100ms duration. RMS signal level including all DC components removed through AC coupling must be limited to 300V. If these values are exceeded, damage to the oscilloscope may occur.
Sample rate range: 500MS/s--1GS/s
Waveform interpolation: (sin x)/x
Sample rate and delay time accuracy: ±50ppm(at over any ≥1ms time interval)
Position range: 20ns/div to 80us/div; (-8div x s/div) to 40ms; 200us/div to 40s/div; (-8div x s/div) to 400s
Rise time at BNC: 3.5ns
Math: +, -, *, /, FFT
FFT windows: Hanning, Flatop, Rectamgular, Bartlett, Blackman, 1024 sample point
Bandwidth limit: 20MHz
Low frequency response: (-3db) >≤10Hz at BNC
Ada masalah dengan produk ini?