Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp55.000
MAX712CPE NiCd/NiMH Battery Fast-Charge Controllers
Rp55.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Integrated Circuit DIP
Varian Lain : MAX713CPE https://www.tokopedia.com/hsk/ic-max713-max713cpe-nicd-nimh-battery-fast-charge-controllers
The MAX712/MAX713 fast-charge Nickel Metal Hydride (NiMH) and Nickel Cadmium (NiCd) batteries from a DC source at least 1.5V higher than the maximum battery voltage. 1 to 16 series cells can be charged at rates up to 4C. A voltage-slope detecting analog-to-digital converter, timer, and temperature window comparator determine charge completion. The MAX712/MAX713 are powered by the DC source via an on-board +5V shunt regulator.
They draw a maximum of 5μA from the battery when not charging. A low-side current-sense resistor allows the battery charge current to be regulated while still supplying power to the battery’s load.
The MAX712 terminates fast charge by detecting zero voltage slope, while the MAX713 uses a negative
voltage-slope detection scheme. Both parts come in 16-pin DIP and SO packages. An external power PNP transistor, blocking diode, three resistors, and three capacitors are the only required external components.
The evaluation kit is available: Order the MAX712EVKITDIP
for quick evaluation of the linear charger.
The MAX712/MAX713 fast-charge Nickel Metal Hydride (NiMH) and Nickel Cadmium (NiCd) batteries from a DC source at least 1.5V higher than the maximum battery voltage. 1 to 16 series cells can be charged at rates up to 4C. A voltage-slope detecting analog-to-digital converter, timer, and temperature window comparator determine charge completion. The MAX712/MAX713 are powered by the DC source via an on-board +5V shunt regulator.
They draw a maximum of 5μA from the battery when not charging. A low-side current-sense resistor allows the battery charge current to be regulated while still supplying power to the battery’s load.
The MAX712 terminates fast charge by detecting zero voltage slope, while the MAX713 uses a negative
voltage-slope detection scheme. Both parts come in 16-pin DIP and SO packages. An external power PNP transistor, blocking diode, three resistors, and three capacitors are the only required external components.
The evaluation kit is available: Order the MAX712EVKITDIP
for quick evaluation of the linear charger.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan