Modul Sensor Arus Hall Current Sensor 150A ACS758 AC or DC for Arduino

SKU: C104 Deskripsi Produk 150A DC / AC HALL CURRENT SENSOR adalah modul sensor pengukur arus listrik menggunakan prinsip hall sensor. Modul ini menggunakan chip ACS758 yang dapat mengukur arus AC/DC sampai maksimal 150 Ampere. Sensitivity K:0.0133V/A Provide VCC: 3V or 5.5V; Signal formula; OU1 = VCC / 2 + ia * k = 2.5 + 0.0133 * ia VCC = 5V k = 0.0133 MV / a; fitur: 1.Industry-leading noise performance through proprietary amplifier and filter design techniques 2.Integrated shield greatly reduces capacitive coupling from current conductor to die due to high dV/dt signals,and prevents offset drift in high-side,high voltage applications 3Total output error improvement through gain and offset trim over temperature 4.Small package size, with easy mounting capability 5.Monolithic Hall IC for high reliability 6.Ultra-low power loss: 100 internal conductor resistance 7.Galvanic isolation allows use in economical, high-side current sensing in high voltage systems 8.3.0 to 5.5 V, single supply operation 9.120 KHz typical bandwidth 10.3 us output rise time in response to step input current 11.Output voltage proportional to AC or DC currents 12.Factory-trimmed for accuracy 13.Extremely stable output offset voltage 14.Nearly zero magnetic hysteresis 15.Board Size:38.22*18.03mm 16.Typical application: Aplikasi: 1. The ACS758 outputs an analog signal,VOUT,that varies linearly with the uni- or bi-directional AC or DC primary sampled current, IP, within the range specified.CF is for optimal noise management, with values that depend on the application. https://robojax.com/learn/arduino/?vid=robojax-allegro_ACS758