Mini Portable WiFi USB HID Injector Rubberducky On Steroids Dongle

Type : Hand Tool Parts Origin : Mainland China Features: 1.The device has an ESP32S2 module that recognizes it as a keyboard + USB stick. 2.HTTP file servers can use both upload and download functions. 3.It #39;s also a slot that can be recognized as an MSC SD card. 4.Use the ESP32S2 as a USB disk with wireless access, supports native USB. 5.Small and compact, portable and easy to carry Specifications: Condition: 100% Brand New Material: ABS plastic Operating Voltage: 3.0 - 3.6V WiFi: 310mA (Peak) Light Sleep: 550 uA Deep Sleep: 20-235 uA Board Size: 17mm x 50mm/0.67 x 1.97in (without USB case) 19mm x 62mm/0.75 x 2.44in (with USB enclosure) ESP32-S2 Module Xtensa single-core 32-bit LX7 microprocessor (up to 240MHz): 1.RISC-V ULP coprocessor 2.128KB ROM and 320KB SRAM 3.4MB embedded SPI flash memory Cryptographic hardware accelerators: AES, ECB/CBC/OFB/CFB/CTR, GCM, SHA, RSA and ECC (digital signature) Physical Security Features: 1.Transparent external flash and RAM encryption (AES-XTS) 2.Secure Boot feature ensures that only signed firmware (with RSA-PSS signature) is booted 3.The HMAC and digital signature modules generate SHA- and signatures using keys not accessible to software Integrated 802.11 b/g/n WiFi 2.4GHz transceiver (up to 150Mbps) Integrated temperature sensor (-20C to 110C) How to put the ESP32-S2 into bootloader mode: Insert the WUD into the laptop Put the magnet close to the hall sensor (GPIO 0) Press the reset button and the WUD will now enter bootloader mode Package Included: 1 * WiFi HID Injector