Peacefair PZEM-022 Close CT 100A Pengukur Listrik KWH Daya Power Volt Amp Watt Energy Meter AC 220V Fitur 6in1

Features: Electrical parameter measurement function (voltage, current, active power, energy, frequency, power factor) Overload alarm function (over power alarm threshold, backlight and power flashing to alarm). Power alarm threshold preset function (can set power alarm threshold). The energy can be reset use the key. Store data when power off. Large-screen LCD Backlight function. Specification: Brand:PEACEFAIR Model: PZEM-022 Working voltage: 80 ~ 260VAC Test voltage: 80 ~ 260VAC Current:100A Operating frequency: 45-65Hz Measurement accuracy: 1.0 grade Size: 9*5*2.5cm/3.5*2*1in Wire length:19cm/7.5in Weight: Approx.110g/3.9oz Appearance and Key function: I.Display Interface Display interface is large-screen LCD, it can display six parameters at the same time. II.Display format ＜10W display format:1.00~9.99W ＜100W display format:10.0~99.9W 2. Energy: test range: 0~999kWh ＜1kWh display format:0~999Wh ＜10kWh display format:1.00~9.99kWh ≥10kWh display format: 10~999kWh 3. Voltage: test range: 80~260V Display format: 80~260V 4. Current: test range: 0~100A,Starting measure current: 0.001A ≥10A display format:10.00~99.99A 5. Frequency: test range: 45~65Hz Display format: 45~65Hz 6. Power factor: test range: 0~1PF Display format: 0.00~1.00PF Key function: 1. Backlight control 2. Reset energy Step1: Long press the key for 5 seconds until the energy value flash, then release the key. Step2: Short press the key again, then the energy value is cleared and exit the reset flashing state. Step3:If there is no operation on the key within 5