Atur jumlah dan catatan
Stok Total: 5991
Subtotal
Rp573.500
MECHANIC UVH900 Series 100g UV Curing Solder Mask Ink Soldering Paint Oil Flux Prevent Corrosive Arcing for BGA PCB Motherboard
Rp573.500
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
SELAMAT DATANG
Model
Mechanic UYH900 Series Solder Mask Oil
Material
Acrylic oligomer
Dielectric strength
>500V/mil
Certification
RoHS compliant
Solder Resistance
255-265 Celsius degree 10s * 3 times
Hardness
>5H
More Function
Moisture proof & Anti-corrosion & Anti-oxidation
Main Function
Insulation, to prevent short circuit of tin
Net Weight
About 90.0g / pcs
Gross Weight
About 100.0g / pcs
What is the solder mask ink oil?
Solder mask insulating varnish on printed circuit board.
A liquid photo solder resist ink oil is an acrylic oligomer.
As a protective layer, it is applied to the circuit and substrate on which the printed circuit board does not need to be soldered or used as a solder resist.
The purpose is to protect the formed line pattern for a long time.
PCB board repair essential materials, one of the most commonly used materials for printed boards.
Industrial applications:
Prevent physical disconnection of the conductor circuit.
Welding only in the parts that must be welded to avoid solder waste.
It has high insulation and makes it possible to increase the density of the circuit.
Reduce copper contamination of the welding trough, can shield the copper foil on the board from the air to prevent oxidation of the copper foil.
Anti-corrosion & Anti-oxidation (Prevent deterioration and corrosion of insulation due to external environmental factors such as dust and moisture.)
In the welding process, the short circuit caused by the bridge is prevented. (Prevent the solder from spreading along the copper foil or causing a short circuit during the production process.)
Instructions:
Substrate treatment: Acid treatment, brush washing, drying.
Screen printing: use the screen version of 36T ~ 51T.
Pre-bake: temperature is 75±2°C, time is 40~50mins, hot air circulation is dry.
Exposure: 300-500mj/cm.
Imaging: imaging solution: 0.9-1.1%, sodium carbonate, temperature: 28-30℃, spray pressure: 1.5-3.0 kg/cm².
Post-baking: temperature is 150, time is 60 mins, hot air
Model
Mechanic UYH900 Series Solder Mask Oil
Material
Acrylic oligomer
Dielectric strength
>500V/mil
Certification
RoHS compliant
Solder Resistance
255-265 Celsius degree 10s * 3 times
Hardness
>5H
More Function
Moisture proof & Anti-corrosion & Anti-oxidation
Main Function
Insulation, to prevent short circuit of tin
Net Weight
About 90.0g / pcs
Gross Weight
About 100.0g / pcs
What is the solder mask ink oil?
Solder mask insulating varnish on printed circuit board.
A liquid photo solder resist ink oil is an acrylic oligomer.
As a protective layer, it is applied to the circuit and substrate on which the printed circuit board does not need to be soldered or used as a solder resist.
The purpose is to protect the formed line pattern for a long time.
PCB board repair essential materials, one of the most commonly used materials for printed boards.
Industrial applications:
Prevent physical disconnection of the conductor circuit.
Welding only in the parts that must be welded to avoid solder waste.
It has high insulation and makes it possible to increase the density of the circuit.
Reduce copper contamination of the welding trough, can shield the copper foil on the board from the air to prevent oxidation of the copper foil.
Anti-corrosion & Anti-oxidation (Prevent deterioration and corrosion of insulation due to external environmental factors such as dust and moisture.)
In the welding process, the short circuit caused by the bridge is prevented. (Prevent the solder from spreading along the copper foil or causing a short circuit during the production process.)
Instructions:
Substrate treatment: Acid treatment, brush washing, drying.
Screen printing: use the screen version of 36T ~ 51T.
Pre-bake: temperature is 75±2°C, time is 40~50mins, hot air circulation is dry.
Exposure: 300-500mj/cm.
Imaging: imaging solution: 0.9-1.1%, sodium carbonate, temperature: 28-30℃, spray pressure: 1.5-3.0 kg/cm².
Post-baking: temperature is 150, time is 60 mins, hot air
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan