IBlu 9IMOD RC Crawler ESC 80A Brushless AM32 2-6S BEC 5.2-8.2V Adjustable for 1/8 1/10 Scale Cars Axial SCX10 Traxxas TRX-4 TRX-6

SELAMAT DATANG DITOKO SAYA. Untuk kualiatas produknya pastinya terjamin asli bukan kw. Harga dan Stock bisa berubah sewaktu waktu. Mohon Chat Admin Toko saya terlebih dahulu sebelum Order yaa..
Brand Name : 9imod
Material : Plastic
Origin : Mainland China
For Vehicle Type : Cars
Remote Control Peripherals/Devices : ESC
Recommend Age : 14+y
Is Electric : No battery
Hign-concerned Chemical : None
9IMOD RC Crawler ESC 80A Brushless AM32 2-6S BEC 5.2-8.2V Adjustable for 1/8 1/10 Scale Cars Axial SCX10 Traxxas TRX-4 TRX-6
Features:
1. AM32 custom firmware
2. Sine wave start allows the motor to operate smoothly at ultra-low speeds
3. Variable driving frequency
4. Low voltage, runaway, and rotor lock protection
5. High-performance 32-bit MCU
6. E-switch, durable and waterproof
7. All wires are pre-soldered
Descriptions:
This ESC comes pre-installed with AM32 custom firmware. It is optimized for crawler vehicles, providing very smooth and quiet operation of your crawler, but it is also suitable for various 1/8 scale or smaller cars. It features a built-in adjustable quad-group voltage BEC, with a maximum current of 10A, for high-torque servo applications. Additionally, the included e-Switch helps avoid failures caused by harsh environments.
Specifications:
Brand: 9IMod
Battery: 2~6S Lipo
Current: 80A (Continuous)
BEC: Max 10A, Output 5.2/6.0/7.4/8.2V, adjustable via DIP switch
Electronic switch supported
Fan: Included, with reserved power plug
Motor power connector: Not included
Wires: Power wire 14AWGx150mm, motor end 14AWGx100mm, signal wire 200mm, electronic switch 125mm
USBLink
For AM32/BL32, connects the ESC to a computer for configuration or firmware upgrade.
Portable and easy to use, simply connect the ESC signal plug, connect the USB Type-C cable to a computer, and install the VCP driver.
AM32 firmware is specifically designed for AT32 ARM processors, for controlling brushless motors (BLDC). The firmware is designed to be safe, fast, with a smooth and rapid start, and linear throttle. It is suitable for various vehicle types and flight controllers.
M32 features include:
Firmware upgradeable via Betaflight pass-through, single-wire serial, or Arduino
Servo PWM, Ds (300,600) motor protocol support
Bi-directional rotation
KISS standard ESC telemetry
Variable PWM frequency
Sine start mode, designed to accelerate large motors
Package Included:
As you choose
Note:
Only the above package content, other products are not included.
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!
Before purchase:
1.All the goods are ready stock, we will arrange the shipment at once if we receive the order.
2.Please read the item description, if you have any question, do not hesitate to contact us.
3.No warranty,if you receive a defect item,please contact us at once with item picture.
4.Use the vouchers for more saving.
After purchase:
1.If you are satisfied,please express your use feeling.
2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. If you receive a defect item,please contact us at once with item picture or video.