Windows Hello Face Recognition Login Camera 1080P IbrA

Windows Hello Face Recognition Login Camera 1080P IbrA Kami Menyediakan Barang yang Anda Butuhkan - Item tersedia - Buka 24 jam, kec admin lagi ketiduran - Hub Kami Untuk Menanyakan varian Barang - Pengiriman cepat 6-15 hari sampai Origin : CN(Origin) Certification : CE modname=ckeditor Windows hello installation guide Precautions: 1. Strictly plug and unplug the camera when the camera is in use (when the LED fill light is on or the infrared is flashing) 2. In order to reduce the failure rate, it is recommended to install the driver for the first use, shut down after installing the driver, and then plug in the USB camera and turn it on again. 3. The brown panel only uses a small amount of glue to dip it. It is recommended to press and unplug the camera part by hand when plugging and unplugging the camera data cable to prevent the lens from being pushed off. : Once the test is successful, please do not plug or unplug the camera at will, especially when the module is turned on, it is easy to damage the module. Installation guide 1. The installation condition system is Windows 10 and PIN login has been turned on Hardware requirements: USB2.0 or 3.0 (recommended for motherboard rear USB, compared to the front panel USB of the chassis, it has fewer extension cables and is more stable) 2. Driver installation http://microfix.space:8989/d/s/615885237641027600/kmBZVzDbDtRDsgYodS1S9QgvXoiDG614-EyDAYQEtjAg_ (If this driver can open the camera but cannot set windows hello, try this one below) http://microfix.space:10086/d/s/631921063208427887/ihtCIj4R2bVLdKMnjgf0wmhiT9KO4P9O-cCEAEKwJxQg_ Alternate download address: https://share.weiyun.com/ (F7YxHQwm Restart after installation 3. System HM1989