Multi-Parameter Analyzer MPP1000 - Three Molded

INATEC - MPP1000 Multi-parameter analyzer The Multi-parameter analyzer can be widely used in urban or rural water supply plants, tap water pipeline networks, tap water secondary water supply, user taps, indoor swimming pools, Online monitoring of water quality such as large-scale water purification equipment and direct drinking water is an indispensable online analysis equipment in the fields of water plant production process control, water conservancy and water management, and sanitation supervision. VARIANT (Three parameters) Turbidity, pH, temperature, molded shell (Three parameters) Turbidity, pH, temperature, stainless steel (Four parameters) Turbidity, residual chlorine/chlorine dioxide, pH, temperature, stainless steel - Rp 158,069,600 (Contact our customers) (Five parameters) Turbidity, pH, residual chlorine/chlorine dioxide, conductivity, temperature - Rp 177,829,600 (Contact our customers) (Five parameters) Turbidity, pH, dissolved oxygen, conductivity, temperature - Rp 207,989,600 (Contact our customers) CHARACTERISTICS PH /ORP : 0-14pH, ±2000mV Turbidity : 0-1NTU / 0-20NTU / 0-100NTU / 0-4000NTU Conductivity : 1-2000uS/cm / 1~200mS/m Dissolved oxygen : 0-20mg/L SPECIFICATION System Index : working power, Power, Cabinet size, Weight, Storage temperature, Working temperature, Working humidity, Inlet flow, Inlet pressure, Communication interface. System Value : (220±22)VAC, (50±1)Hz, 30W, 800mm*506mm*180mm (standard version), about 15Kg, 4℃~+50℃, 4℃~+50℃ / -25℃~+50℃(optional temperature control heating antifreeze module), ≤95%RH (no condensation), 500-1000 mL/min, lt; 3kg/cm³, RS485 Modbus RTU communication protocol + wireless interface. Turbidity Index : Range, Resolution, Lower detection limit, Zero drift, Indication stability, Accuracy, Repeatability, Response time, Recommended maintenance period Turbidity Value : 0-1NTU / 0-20NTU / 0-100NTU / 0-4000NTU, 0-1NTU / 0-20NTU / 0-100NTU:0.001NTU 0-4000NTU:0.01NTU, 0.02 NTU; 0.1NTU (0-4000NTU), ≤1.5%, ≤1.5%, 2% or ±0.02NTU; 5% or 0.5NTU (0-4000NTU), ≤3%, T90≤120s, 3-12 months (depending on the water quality on site) Residual chlorine/chlorine dioxide Index : Range, Resolution, Lower detection limit, Accuracy Response time, Recommended maintenance period Residual chlorine/chlorine dioxide Value : 0-5mg/L / 0-20mg/L, 0.01mg/L, 0.05mg/L, ±0.05mg/L or ±5% (DPD comparison error ±10%), ≤120 seconds, 1-3 months or weekly calibration, 3-6 months to replace consumables. PH /ORP(optional) Index : Range, Resolution, Accuracy, Repeatability, Response time, Recommended maintenance period PH /ORP(optional) Value : 0-14 pH, ±2000 mV (ORP), 0.01 pH, ±1 mV (ORP), ±0.1 pH, ±20 mV (ORP) or ±2%, ±0.1 pH, ±10 mV (ORP), ≤60 seconds, 1-3 months Temperature Index : Range, Resolution, Accuracy, Repeatability, Response time, Recommended maintenance period Temperature Value : 0℃ - 50℃, 0.1℃, ±0.5℃, ≤0.5℃, ≤25 seconds, 12 months Conductivity (Optional) Index : Range, Accuracy, Repeatability, Response time, Recommended maintenance period Conductivity (Optional) Value : 0-2000uS/cm , ±1.5%FS, ≤0.5%FS≤30 seconds, 3-6 months Dissolved oxygen (Optional) Index : Range, Accuracy, Repeatability, Response time, Recommended maintenance period Dissolved oxygen (Optional) Value : 0-20mg/L, ±0.3mg/L, ≤±1.5%, ≤30 seconds, 1-3 months Expansion port Index : Port type Expansion port Value : RS485, 4-20mA NOTE Pre-order 2~ 4 week.