Heating Element Dia 16mm SIC (Silicon Carbide Heater) DH & DL Type - DH163020

DESCRIPTION SIC is characterized by high use temperature, superior oxidation resistance, low corrosion, long service life, low creep, and accessible installation features, i.e., complete accessories. DH amp;DL type is a straight rod type resistance heating element made of green silicon carbide as the main raw material, through hydraulic preliminary forming, baking, sintering and recrystallization, hot and cold end resistance cooperation and 2400 ℃ secondary sintering according to a certain proportion. The temperature of SIC heating element can reach 1450 ℃. When the temperature reaches 1300 ℃, a dense glass oxide film can be formed on the surface of the rod, which prevents itself from being oxidized, thus greatly prolonging the service life of the rod. PHYSICAL PROPERTIES Bulk density: 2.5g/cm3 Porosity: 23% Thermal Conductivity: 14-19W/m·℃ (1000℃） Rupture Strength: 50Mpa（25℃） Specific Heat: 1.0kj/kg·℃ (25~1300℃) Coefficient of Thermal Expansion: 4.5×10-⁶ SPECIFICATION AND VARIANT DH163020 Diameter 16mm, Hot zone 300mm, Cold end 200mm, overall 700mm, Hot zone surface area 150cm2, 70Vac, 2400W, 2 Ohm. DH164525 Diameter 16mm, Hot zone 450mm, Cold end 250mm, Overall 950mm, Hot zone surface area 225cm2, 110Vac, 3600W, 3,3 Ohm. DH166025 Diameter 16mm, Hot zone 600mm, Cold end 250mm, overall 1100mm, Hot zone surface area 300cm2, 140Vac, 4800W, 4,1 Ohm. DH165025 Diameter 16mm, Hot zone 500mm, Cold end 250mm, overall 1000mm, Hot zone surface area 250cm2, 120Vac, 4000W, 3,6 Ohm. DL163020 Diameter 16mm, Hot zone 300mm, Cold end 200mm, overall 700mm, Hot zone surface area 63cm2, 47Vac, 3530W, 1,7 Ohm. DL164525 Diameter 16mm, Hot zone 450mm, Cold end 250mm, Overall 950mm, Hot zone surface area 93cm2, 69Vac, 4640W, 2,45 Ohm. DL166025 Diameter 16mm, Hot zone 600mm, Cold end 250mm, overall 1100mm, Hot zone surface area 122cm2, 90Vac, 3100W, 3,21 Ohm. FAST RESPONSE Admin (WA) 081399001616 sales@bedas.co.id