Atur jumlah dan catatan
Stok Total: 20
Subtotal
Rp2.475.000
Noyafa NF-8601S TDR Cable Tracer Tester with PoE / Ping for RJ45, RJ11, BNC, Metal Cables
Rp2.475.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Network
Features & Benefits:
CAT5/6/7 tester: Continuity testing for Coaxial cables, RJ45 network cables, and RJ11 telephone cables. Display wiring fault names directly like Open Circuit, Short Circuit, etc.
TDR test: With TDR technology, 500m max (1640ft) length measurement for RJ11, RJ45, Coaxial, and power cables (only 2% error!). When faults exist, the NF-8601S TDR meter displays the distance to the fault.
Ethernet cable tester: Identify the power over ethernet cables and detect the exact voltage. It tells the pins delivering DC powers and data.
Network toner: Toner probe with complete AC interference rejection to trace ethernet cables. Three modes are available for fast and accurate cable tracing: high frequency / PoE switch / low frequency.
Port blinking: Easy and quick locating ethernet ports on the server/switch/hub/router port by the generated flashing light. It is convenient for identifying a cable connected to the switch.
Ping test: Network performance check and quality measurements. Examine the data packet and the minimum & maximum time to send and receive data.
Non-Contact Voltage Tester: Toner probe with NCV detector (90-1000V). One tap to tell if electricity runs through an object without touching it.
Extra accessories: 3.7V 1800mAh rechargeable lithium battery, 1GB TF card for data storage and export, adapters, and clamps to improve compatibility.
Friendly Offer & Considerate UI: Compared to expensive Fluke and Klein TDR tools, NOYAFA offers a budget-friendly alternative. Measure and test ethernet with no steep learning curve and zero practice.
Key Spec:
Tracing Cables: RJ45 (CAT7 included), RJ11, BNC, Power Cable
Measure Cable Length: RJ45(CAT7 included), RJ11, BNC, Power Cable
Check Cable Error: RJ45(CAT7 included), RJ11, BNC, Power Cable
Max. Cable Length: 500m (1640ft)
Power Supply: Li-battery
Display Screen: Color
Length Measure Theory: TDR
Anti-current INterference: Yes
Data exported to PC: Yes
Port Flash: Yes
Scan on PoE Switch: Yes
High / Low Freq. Scan Mode; Yes
PoE Detecting: Yes
Ping Function: Yes
AC Voltage Detecting: Yes
Length Measurement Range: 5m-500m (18ft-1640ft)
Calibration Precision: 2%(+/-0.5m, or +/-1.5feet)
Measurement Precision: 3%(+/-0.5m, or +/-1.5feet)
Remote Units: 1pc
CAT5/6/7 tester: Continuity testing for Coaxial cables, RJ45 network cables, and RJ11 telephone cables. Display wiring fault names directly like Open Circuit, Short Circuit, etc.
TDR test: With TDR technology, 500m max (1640ft) length measurement for RJ11, RJ45, Coaxial, and power cables (only 2% error!). When faults exist, the NF-8601S TDR meter displays the distance to the fault.
Ethernet cable tester: Identify the power over ethernet cables and detect the exact voltage. It tells the pins delivering DC powers and data.
Network toner: Toner probe with complete AC interference rejection to trace ethernet cables. Three modes are available for fast and accurate cable tracing: high frequency / PoE switch / low frequency.
Port blinking: Easy and quick locating ethernet ports on the server/switch/hub/router port by the generated flashing light. It is convenient for identifying a cable connected to the switch.
Ping test: Network performance check and quality measurements. Examine the data packet and the minimum & maximum time to send and receive data.
Non-Contact Voltage Tester: Toner probe with NCV detector (90-1000V). One tap to tell if electricity runs through an object without touching it.
Extra accessories: 3.7V 1800mAh rechargeable lithium battery, 1GB TF card for data storage and export, adapters, and clamps to improve compatibility.
Friendly Offer & Considerate UI: Compared to expensive Fluke and Klein TDR tools, NOYAFA offers a budget-friendly alternative. Measure and test ethernet with no steep learning curve and zero practice.
Key Spec:
Tracing Cables: RJ45 (CAT7 included), RJ11, BNC, Power Cable
Measure Cable Length: RJ45(CAT7 included), RJ11, BNC, Power Cable
Check Cable Error: RJ45(CAT7 included), RJ11, BNC, Power Cable
Max. Cable Length: 500m (1640ft)
Power Supply: Li-battery
Display Screen: Color
Length Measure Theory: TDR
Anti-current INterference: Yes
Data exported to PC: Yes
Port Flash: Yes
Scan on PoE Switch: Yes
High / Low Freq. Scan Mode; Yes
PoE Detecting: Yes
Ping Function: Yes
AC Voltage Detecting: Yes
Length Measurement Range: 5m-500m (18ft-1640ft)
Calibration Precision: 2%(+/-0.5m, or +/-1.5feet)
Measurement Precision: 3%(+/-0.5m, or +/-1.5feet)
Remote Units: 1pc
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan