Matek F411 WING Built-in OSD STM32F411 F4 Flight Controller

If you are looking for a tiny fixed wing Inav flight controller the Matek F411 is your ideal choice. This board is the little brother of the popular F405 wing flight controller from Matek making it ideal for aircraft that have less interior room. But just because the F411 is smaller it still packs all of the essential features like multiple 5V BEC's for your servos, and peripherals. This F411 wing board is just 28mm x 41mm in stize making it suitable for just about any FPV aircraft. You still get a current sensor, BMP280 Barometer, built in OSD, and a 8Khz MPU6000 IMU on this tiny board.

Things missing from the F411 Wing from F405 Wing :
Blackbox Logging
No 12V BEC for FPV gear
No RSSI input
Lower current 5V BEC at 3A (F405 wing has 5A BEC)
2 UARTS (F405 wing has 6)
1 I2C (F405 wing has 2)
Smaller current sensor (78A vs 104A)
Lower current 3.3V BEC at 200mA (F405 wing has 300mA)

Specifications
MCU: 100MHz STM32F411
IMU: MPU6000 accelerometer/gyro (SPI)
Baro: BMP280 (I2C)
OSD: INAV OSD w/ AT7456E chip
Blackbox: No
VCP & 2x UARTs
2x Motors, 5x Servos outputs
1x I2C
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
Built in inverter for SBUS input (UART1-RX)
PPM: ST1 pad with softserial disabled
SoftSerial on ST1 pad
Battery Voltage Sensor: 1:10 (Scale 1100)
WS2812 Led Strip support: Yes
Beeper : Yes
RSSI: No

PDB
Input voltage : 6.5~30V (2~6S LiPo) w/TVS protection
2x ESC power pads
Current Senor: 78A, 3.3V ADC, Scale 423
BEC 5V output
Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed: 2 Amps

BEC Vx output
Designed for Servos
Voltage adjustable, 5V Default, 6V via jumper
Current: 3 Amps

BEC 3.3V output
Designed for Baro / Compass module and Spektrum RX
ar Regulator
Current: 200mA

Physical
Mounting: