Arduino Nano FT232RL IC + Kabel data

Arduino Nano FT232RL IC + Kabel data Description: This Arduino Nano board is a clone version, not the official version which is made in Italy , They use the same Gerber files to be produced in China. They are exactly the same in addition to silk-screen. Arduino Nano is a surface mount breadboard embedded version with integrated USB. It is a small, complete, and breadboard friendly. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper. Physically, it is missing the power jack. The Nano will automatically sense and switch to the higher voltage source of power, there is no need for the power select jumper. Nano'''s got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It'''s got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other). Automatic reset during program download Power LED Green (TX), red (RX) and orange (L) LED Auto sensing/switching power input Small mini-B USB for programming and serial monitor ICSP header for direct program download Standard 0.1''' spacing DIP (breadboard friendly) Manual reset switch The Arduino Nano can be powered via the mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source. DS_ATMEGA328.pdf DS_IM120411003_Arduino_Nano.pdf Schematic SCH_IM120411003_Arduino_Nano.pdf