5.0/ 5.0
100% pembeli merasa puas
5 rating • 3 ulasan
5(5)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 8888
Subtotal
Rp6.809.000
INDOCART 3D Printer Bambu Lab AMS X1 P1P Automatic Material System
Rp6.809.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: 3D Bambu Lab - Spare Part
INDOCART 3D Printer Bambu Lab AMS X1 P1P Automatic Material System
Kode Produk:
V-F-BL-SA001
Compatibility:
X1 Series, P1P
-Bambu Lab AMS is an intelligent system that communicates with the toolhead to guarantee smooth feeding and automatic mid-print filament switching. It can detect the tension on filament and actively adjust the feeding pace. With RFID technology, Bambu Lab AMS identifies filament loaded inside and automatically configures the most appropriate print settings.
-Bambu Lab AMS equipped with humidity sensors and with an airtight enclosure, it keeps the filament dry and ready to use, which is especially helpful for engineering grade materials such as nylon and polycarbonate, which are hydroscopic.
-Each Bambu Lab AMS is composed of 4 filament slots, and up to 4 AMS can be installed in parallel. With multiple filament slots at disposal, it's now possible to use snap-away support material or dissolvable filament to minimize the pain of removing supports
-Each AMS unit comes with 4 Reusable Spools (1 high temperature spool and 3 low temperature spools).
Specification:
Material: ABS
Product Size: 368*283*224mm
Packing Size: 445*365*320mm
Weight: 5kg
Note:
1.The AMS supports spools with a width of 50-68mm and the diameter of around 200mm.
2.Please make sure to avoid using soft materials like TPU or damp PVA, as they can get stuck in the AMS. It is also highly advised to avoid using abrasive filaments such as glow in the dark, and other particle infused filaments such as CF, as these will induce premature wear and failure on the AMS feeder funnel.
In the Box:
1x PC/ABS Alloy Material High Temperature Reusable Spool
3x ABS Material Reusable Spool
1x Filament Buffer
1x Bus Cable 4pin
1x Bus Cable 6pin
2x Spare Filament Cutter
3x M3*23 Screw
1x PTFE Tube
1x PTFE Tube Connector
1x Instruction Manual
Pastikan anda mendapatkan kualitas terbaik hanya di IndoCart.
Kode Produk:
V-F-BL-SA001
Compatibility:
X1 Series, P1P
-Bambu Lab AMS is an intelligent system that communicates with the toolhead to guarantee smooth feeding and automatic mid-print filament switching. It can detect the tension on filament and actively adjust the feeding pace. With RFID technology, Bambu Lab AMS identifies filament loaded inside and automatically configures the most appropriate print settings.
-Bambu Lab AMS equipped with humidity sensors and with an airtight enclosure, it keeps the filament dry and ready to use, which is especially helpful for engineering grade materials such as nylon and polycarbonate, which are hydroscopic.
-Each Bambu Lab AMS is composed of 4 filament slots, and up to 4 AMS can be installed in parallel. With multiple filament slots at disposal, it's now possible to use snap-away support material or dissolvable filament to minimize the pain of removing supports
-Each AMS unit comes with 4 Reusable Spools (1 high temperature spool and 3 low temperature spools).
Specification:
Material: ABS
Product Size: 368*283*224mm
Packing Size: 445*365*320mm
Weight: 5kg
Note:
1.The AMS supports spools with a width of 50-68mm and the diameter of around 200mm.
2.Please make sure to avoid using soft materials like TPU or damp PVA, as they can get stuck in the AMS. It is also highly advised to avoid using abrasive filaments such as glow in the dark, and other particle infused filaments such as CF, as these will induce premature wear and failure on the AMS feeder funnel.
In the Box:
1x PC/ABS Alloy Material High Temperature Reusable Spool
3x ABS Material Reusable Spool
1x Filament Buffer
1x Bus Cable 4pin
1x Bus Cable 6pin
2x Spare Filament Cutter
3x M3*23 Screw
1x PTFE Tube
1x PTFE Tube Connector
1x Instruction Manual
Pastikan anda mendapatkan kualitas terbaik hanya di IndoCart.
Ada masalah dengan produk ini?