Magnetic Spring Steel Double Textured PEI Build Platform 235x235x0.4mm Digunakan sebagai build platform 3D Printer, PEI surface baik untuk berbagai jenis filament dan menempel dengan baik, jika setelah selesai print, untuk mencopotnya tinggal tekuk plat sedikit. Ukuran : 235 x 235mm Warna : Natural Amber PEI Tipe PEI : Smooth Ketebalan : 0.4mm Recommend Print Temperature : PLA : ~60C HTPLA : ~60C PETG : ~70-80C PCTG : ~70-80C ABS : ~100C WARNING : PETG/PCTG/TPU– If you are not careful with your 1st layer you can risk bonding the PETG/PCTG/TPU to the PEI surface. This will damage the surface. To prevent damage to the surface apply hairspray or PVA gluestick before printing PETG/PCTG/TPU on the PEI OBJECT REMOVAL : Make sure your plate is at close to room temp (under 30C) before removing parts. If you remove when hot it more likely to damage the surface. Harga tertera untuk : 1x Magnetic Spring Steel Double Textured PEI Build Platform 235x235x0.4mm