XERUN-120A V3.1 / V3 BLUE EDITION

Strongest: Most advanced software functions

Simplest: Built-in electronic switch saves chassis space

Easiest: 10 Pre-set profiles for Plug and Play

Most Reliable: Innovative heat dissipation structure



XERUN-120A-V3.1 has 3 color options:

Blue edition: PN=81020340

Black edition: PN=81020350

Red edition: PN=81020360

Advantages of XERUN-120A-V3.1 speedo

Aluminum bottom case improves the heat dissipation (The previous V3 speedo uses plastic bottom case);

Improved heat-sink with 1mm gap between the cooling fan allows more air flow to reduce the temperature of speedo;

Improved dust-proof design. Rubber rings are applied at the sensor port and the program port;

Aluminum screws of cooling fan look better and more professional;

Improved electronic switch has stronger current endurance to be more reliable;

New firmware allows driver to adjust the throttle neutral range, and solves the "turbo lost in high temperature" problem in the previous version firmware.



1 Specification

Specification XERUN-120A-V3.1

Current Continuous: 120A, Burst: 760A

Input * Note #1 4-9 cells NiMH/NiCd or 2-3S LiPo

Built-in BEC 6V@3A (linear mode)

Resistance 0.0003 Ohm

Motor Supported Sensored and sensorless brushless motor

Suitable Motor With 2 Lipo or 4-6 NiMH

1/10 on-road: >=3.5T, 1/10 off-road: >=5.5T



With 3 Lipo or 7-9 NiMH

1/10 on-road: >=5.5T, 1/10 off-road: >=8.5T

Suitable Car 1/10,1/12 all competitions

1/10,1/8 rock crawler

Cooling Fan 5V

Size 37.5mm(L) * 31mm(W) * 29.5mm(H), excludes wire connectors

37.5mm(L) * 37mm(W) * 29.5mm(H), includes wire connectors

Weight 93g

* Note #1

For 4-6 cells NiMH/NiCd or 2S LiPo, the standard cooling fan needn't be changed.

For 7-9 cells NiMH/NiCd or 3S LiPo, the standard cooling fan needs to be changed to 12V high voltage fan.



2 F