EDM FILTER OSHITARI OMF-340FK filter EDM Sinking Φ340 x 300 (2PC) ORI

Features It is a filter for electric discharge machines with a long life and high filtration accuracy due to the filter material that the attached chips can easily peel off and the unique filter paper folding structure. There is extremely little turbidity at the start of filtration, and performance improvements such as surface roughness, prevention of secondary discharge, longer life of ion exchange resin, and transparency of clean tanks can be expected. Use For mold processing. Product specifications Specifications / Standards Maximum working pressure: 0.25MPa Super filter series Filtration accuracy: standard Inner filter paper: None Compatible models: Mitsubishi Electric FX, CX, DWC-532, BA-8, Makino Milling U, UP, W, FB, SP, EU, UH, DUO, UPJ, Seibu Electric EW- (A5S2, C5S, C5S2, M500S) , M, MM, Super Dimensions (mm): φ340 x 300 Joint (shape): Coupling Joint (material): ABS resin Pressure (kg / (CM2)): Internal pressure (0.25MPa) Coupler (shape): Yes Coupler (material): ABS resin Outer diameter: φ340 mm x height 300 mm Material Top plate, outer cylinder: resin, iron Filter paper: Chemical fiber Painting: Electrodeposition painting Mass / mass unit 8kg terms of use ―――― Notes If the built-in pressure gauge shows 0.25MPa, replace it with a new filter. Be sure to wear gloves when replacing the machine after stopping the machine. The used filter is heavy due to water, sludge, etc., so be careful when removing it. Set contents / accessories ―――― Country of manufacture Japan