Abb Softstarter Pse25-600-70 Soft Starter 25A 11Kw 1Sfa897102R7000

Softstarter PSE25-600-70 for max 600V main voltage and 100 - 250V 50/60Hz control supply voltage.

Cara kerja soft starter mirip inverter untuk mengurangi inrush current (lonjakan arus awal start), bedanya kalau di softstarter putaran motor tidak bisa diset

Dimensions
Product Net Width:90 mm
Product Net Height:245 mm
Product Net Depth / Length:184 mm
Product Net Weight:2.5 kg
Technical
Rated Control Supply Voltage (Us):100 ... 250 V AC
Rated Control Circuit Voltage (Uc):DC Operation 24 V
Rated Frequency (f):50/60 Hz
Main Circuit 50 / 60 Hz
(400 V) 11 kW
Service Factor Percentage:100 %
Overload Protection:Build-in electronic overload protection
Integrated Electronic Overload:Yes
Adjustable Rated Motor Current Ie:30 ... 100 %
Starting Capacity at Maximum Rated Current Ie:4xIe for 10s
Ramp Time:0 ... 30 second [unit of time]
1 ... 30 second [unit of time]
Initial Voltage During Start:30 ... 70 %
Step Down Voltage Special Ramp:No %
Current Limit Function:1.5 ... 7xIe
Switch for Inside Delta Connection:No
Run Signal Relay:Yes
By-pass Signal Relay:Yes
Fault Signal Relay:Yes
Overload Signal Relay:Yes
Analog Outputs:4…20 mA
Signal indication completed start ramp (LED):Green
Signal indication ready to start/standby ON (LED):Green
Signal indication running R (LED):Green
Signal indication ramping up/down (LED):Green
Signal indication protection (LED):Yellow
Signal indication fault (LED):Red
Number of Starts Per Hour at 3.5*Ie for 7 sec. 50% ON Time 50% OFF Time:10
Communication:FiledBusPlug(Optional)
Degree of Protection:IP00
Terminal Type:Screw Terminals
Connecting Capacity Main Circuit:Hole Diameter 8.5 MMT mm²
Rigid 1/2 x 2.5 ... 70 mm²
Width and Thickness 17.5x5 MMT
...