HIKVISION DS-3E1326P-EI SMART POE SWITCH 24 PORT POE 2 UPLINK 400W

24 Port Fast Ethernet Smart POE Switch
24 100 Mbps PoE RJ45 ports, 2 gigabit combos.
IEEE 802.3at/af standard for PoE ports.
Network topology management, alarm push, network health monitor.
6 KV surge protection for PoE ports.
AF/AT camera can reach up to 300 m in extend mode.

General
Shell
Metal material
Net Weight
2.83 kg (6.24 lb)
Gross Weight
3.800 kg (8.38 lb)
Dimensions (W H D)
440.00 mm 44.00 mm 221.00 mm (17.32'' 1.73'' 8.70'')
Operating Temperature
0 C to 45 C (0 F to 113 F)
Storage Temperature
-40 C to 85 C (-40 F to 185 F)
Operating Humidity
5% to 95% (no condensation)
Relative Humidity
5% to 95% (no condensation)
Power Supply
100-240 VAC, 50/60 Hz, Max. 6.5 A
Installation Mode
Rack (equipped with mounting ears)
Max. Power Consumption
400 W
Power Consumption In Idle
30 W
Surge Protection
6 KV
Network Parameters
Pelabuhan
24 10/100 Mbps PoE port,2 Gigabit combo
MAC Address Table
16 K
Switching Capacity
14.8 Gbps
Packet Forwarding Rate
11.01 Mpps
Internal Cache
4 Mbits
PoE Power Supply
PoE Standard
IEEE 802.3af,IEEE 802.3at
PoE Power Pin
8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE Port
PoE: Ports 1 to 24
Max. Port Power
30 W
PoE Power Budget
370 W
Software Function
Long Range
Ports 1 to 24: up to 300 m.

Long range performance may vary depend on camera model or cable condition.

VIP Port
Ports 1 to 8: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.
Link Aggregation
Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.

Support static link aggregation.

Support 1 aggregation group(s).

HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:

1. Display the port rate.

2. Display the port bandwidth utilization rate.

3. Display the PoE power usage.

4. Display topology information.

5. Display the alarm status.

6. Restart ports and devices.

7. Enable port long-rage mode.

8. Remotely upgrade the device.

System Maintenance
Support remote upgrade, recovering default parameters, viewing logs, configuring basic network parameters.
Approval
EMC
FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN 61000-3-2: 2014, EN 61000-3-3: 2013, EN 55024: 2010 +A1: 2015); RCM (AS/NZS CISPR 32: 2015); IC (ICES-003: Issue 6, 2016)
Safety
UL (UL 60950-1); CB (IEC 60950-1:2005 + Am 1:2009 + Am 2:2013); CE-LVD (EN 60950-1:2005 + Am 1:2009 + Am 2:2013)
Chemistry
CE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No.1907/2006)