5.0/ 5.0
100% pembeli merasa puas
3 rating • 1 ulasan
5(3)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 3
Subtotal
Rp17.000
A4988 PWM Stepper Motor Driver Module For 3D Printer
Rp17.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Audio
Features:
Simple step and direction control interface, short-to-ground and shorted-load protection.
Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.
Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay).
Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection.
Adjustable current control lets you set the maximum current output with
a potentiometer, which lets you use voltages above your stepper
motor's rated voltage to achieve higher step rates.
Internal synchronous
rectification control circuitry is provided to improve the pulse-width
modulation (PWM) operation power consumption.
Specifications:
Step Mode: Full, half, 1/4, 1/8
and 1/16.
Output Driver Capacity: 35V, ±2A
Driver Size: 20 x 15mm / 0.78 x 0.59"
Heat Sink Size: 5 x 5mm / 0.19 x 0.19"
Weight: 2.9gr.
Simple step and direction control interface, short-to-ground and shorted-load protection.
Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.
Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay).
Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection.
Adjustable current control lets you set the maximum current output with
a potentiometer, which lets you use voltages above your stepper
motor's rated voltage to achieve higher step rates.
Internal synchronous
rectification control circuitry is provided to improve the pulse-width
modulation (PWM) operation power consumption.
Specifications:
Step Mode: Full, half, 1/4, 1/8
and 1/16.
Output Driver Capacity: 35V, ±2A
Driver Size: 20 x 15mm / 0.78 x 0.59"
Heat Sink Size: 5 x 5mm / 0.19 x 0.19"
Weight: 2.9gr.
Ada masalah dengan produk ini?