FESTO Compact cylinder ADN-25-100-I-P-A (536250)

Stroke 1 mm ... 300 mm Piston diameter 25 mm Cushioning Elastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning Mounting position optional Conforms to standard ISO 21287 Design Piston Piston rod Profile barrel Position detection Via proximity switch Variants EX protection approval (ATEX) Metals with copper, zinc or nickel by mass as main constituent are excluded from use. Exceptions are nickel in steel, chemically nickelplated surfaces, printed circuit boards, cables, electrical plug connectors and coils. Improved running performance Extended male piston rod thread Custom thread on the piston rod Extended piston rod With protection against rotation High corrosion protection Dust protection Reinforced piston rod Uniform, slow movement Low friction Through piston rod Through, hollow piston rod Heat-resistant seals max. 120°C Laser etched rating plate Temperature range -40 to 80°C Piston rod at one end Operating pressure 0.06 MPa ... 1 MPa Operating pressure 0.6 bar ... 10 bar Mode of operation Double-acting CE mark (see declaration of conformity) To EU Explosion Protection Directive (ATEX) CE marking (see declaration of conformity) To UK EX instructions Explosion protection certification outside the EU EPL Db (GB) EPL Gb (GB) Explosion protection Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) ATEX category gas II 2G ATEX category dust II 2D Explosion ignition protection type for gas Ex h IIC T4 Gb Explosion ignition protection type for dust Ex h IIIC T120°C Db Explosion ambient temperature -20°C lt;= Ta lt;= +60°C Operating medium Compressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required) Corrosion resistance class CRC 0 - No corrosion stress 2 - Moderate corrosion stress 3 - high corrosion stress LABS (PWIS) conformity VDMA24364-B1/B2-L VDMA24364 zone III Suitability for the production of Li-ion batteries Metals with more than 1% by mass of copper, zinc or nickel by mass are excluded from use. Exceptions are nickel in steel, chemically nickelplated surfaces, printed circuit boards, cables, electrical plug connectors and coils Ambient temperature -40 °C ... 120 °C Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke 247 N Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke 247 N ... 295 N Additional weight per piston rod extension of 10 mm 6 g Additional weight per piston rod thread extension of 10 mm 4 g Type of mounting Either: With through-hole Via female thread With accessories Pneumatic connection M5 Note on materials RoHS-compliant Material collar screws Steel Material cover Anodised wrought aluminium alloy Material piston rod High-alloy steel Material cylinder barrel Smooth-anodised wrought aluminium alloy