Download Tokopedia App
Tentang TokopediaMulai Berjualan PromoTokopedia Care
tokopedia-logo
Kategori
Atur jumlah dan catatan

Stok Total: Sisa 5

Subtotal

Rp1.830.390

FESTO Compact cylinder ADN-40-8-A-P-A (536288)

Rp1.830.390
  • Kondisi: Baru
  • Waktu Preorder: 30 Hari
  • Min. Pemesanan: 1 Buah
  • Etalase: Semua Etalase
Stroke 8 mm Piston diameter 40 mm Cushioning Elastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning Mounting position optional Conforms to standard ISO 21287 Design Piston Piston rod Profile barrel Position detection Via proximity switch Variants EX protection approval (ATEX) Metals with copper, zinc or nickel as main constituent are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils. Improved running performance Extended male piston rod thread Custom thread on the piston rod Extended piston rod With protection against rotation High corrosion protection Dust protection Reinforced piston rod Uniform, slow movement Low friction Through piston rod Through, hollow piston rod Heat-resistant seals max. 120°C Laser etched rating plate Temperature range -40 to 80°C Piston rod at one end Operating pressure 0.06 MPa ... 1 MPa Operating pressure 0.6 bar ... 10 bar Mode of operation Double-acting CE mark (see declaration of conformity) To EU Explosion Protection Directive (ATEX) CE marking (see declaration of conformity) To UK EX instructions Explosion protection Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) ATEX category gas II 2G ATEX category dust II 2D Explosion ignition protection type for gas Ex h IIC T4 Gb Explosion ignition protection type for dust Ex h IIIC T120°C Db Explosion ambient temperature -20°C lt;= Ta lt;= +60°C Operating medium Compressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required) Corrosion resistance class CRC 0 - No corrosion stress 2 - Moderate corrosion stress 3 - high corrosion stress LABS (PWIS) conformity VDMA24364-B1/B2-L VDMA24364 zone III Suitability for the production of Li-ion batteries Metals with more than 1% copper, zinc or nickel by mass are excluded from use. Exceptions are nickel i

Ada masalah dengan produk ini?

ULASAN PEMBELI

Toped Illustration

Belum ada ulasan untuk produk ini

Beli produk ini dan jadilah yang pertama memberikan ulasan