FESTO Linear drive DGC-K-50-1600-PPV-A-GK (1312504)

Stroke 1 mm ... 8500 mm
Piston diameter 32 mm
Cushioning Elastic cushioning rings/plates at both ends
Pneumatic cushioning, adjustable at both ends
Shock absorber, hard characteristic curve
Shock absorber, soft characteristic curve
Mounting position optional
Guide Plain-bearing guide
Basic guide
Recirculating ball bearing guide
Position detection Via proximity switch
Variants Axis clamping unit
Protected recirculating ball bearing guide
Additional slide, standard, on left
Additional slide, standard, on right
Operating pressure 0.2 MPa ... 0.8 MPa
Operating pressure 2 bar ... 8 bar
Mode of operation Double-acting
CE mark (see declaration of conformity) To EU Explosion Protection Directive (ATEX)
CE marking (see declaration of conformity) To UK EX instructions
Explosion protection certification outside the EU EPL Dc (GB)
EPL Gb (GB)
Explosion protection Zone 1 (ATEX)
Zone 1 (UKEX)
Zone 2 (ATEX)
Zone 22 (ATEX)
Zone 22 (UKEX)
ATEX category gas II 2G
ATEX category dust II 3D
Explosion ignition protection type for gas Ex h IIC T4 Gb X
Explosion ignition protection type for dust Ex h IIIC T120°C Dc X
Explosion ambient temperature -10°C
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will
always be required)
Corrosion resistance class CRC 0 - No corrosion stress
1 - Low corrosion stress
2 - Moderate corrosion stress
LABS (PWIS) conformity VDMA24364-B1/B2-L
Suitable for use with food See supplementary material information
Ambient temperature -10 °C ... 60 °C
Cushioning length 17.5 mm
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke 483 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke 483 N
alternative connections See product drawing
Type of mounting With accessories
Pneumatic connection, clamping unit M5
Note on materials RoHS-compliant
Material cover Wrought aluminium alloy
Material seals NBR
TPE-U(PU)