STM32F411E-DISCO ARM Discovery kit STM32F411VE MCU

Ayo buruan di checkout! Stock sangat terbatas gan^^ Untuk barang dengan status PO harap hubungi kami dulu ya gan/sis^^ Spesifikasi MCU ================== • STM32F411VET6 in LQFP100 package • ARM 32-bit Cortex -M4 CPU with FPU • 100 MHz max CPU frequency • VDD from 1.7 V to 3.6 V • 512 KB Flash • 128 KB SRAM • GPIO with external interrupt capability • Desc by tokopedia.com/inventist •1x12-bit, 2.4 MSPS ADC with 16 channels • DMA Controller • Up to 11 Timers (six 16-bit, two 32-bit, two watchdog timers and a SysTick timer) • USART/UART (3) • I2C (3) • SPI/I2S (5) •SDIO • USB 2.0 full-speed device/host/OTG controller with on-chip PHY • CRC calculation unit • 96-bit unique ID • RTC Spesifikasi Board (DISCOVERY) ================== • STM32F411VET6 microcontroller featuring 512 KB of Flash memory, 128 KB of RAM in an LQFP100 package • On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging) • Board power supply: through USB bus or from an external 5 V supply voltage • External application power supply: 3 V and 5 V • Desc by tokopedia.com/inventist • L3GD20: ST MEMS motion sensor 3-axis digital output gyroscope • LSM303DLHC: ST MEMS system-in-package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor • MP45DT02: ST MEMS audio sensor, omnidirectional digital microphone • CS43L22, audio DAC with integrated class D speaker driver • Eight LEDs: LD1 (red/green) for USB communication LD2 (red) for 3.3 V power on Four user LEDs: LD3 (orange), LD4 (green), LD5 (red) and LD6 (blue) • Two USB OTG LEDs: LD7 (green) VBus and LD8 (red) over-current • Two push-buttons (user and reset) • USB OTG with micro-AB connector • Extension header for LQFP100 I/Os for a quick connection to the prototyping board and an easy probing • Comprehensive free software including a variety of examples, part of STM32CubeF4 package or STSW-STM32136 for legacy Standard Libraries usage