Atur jumlah dan catatan
Stok Total: Sisa 5
Subtotal
Rp14.533.000
MITUTOYO 543-300B/ID-C112AXB 543-300/ID-C112AX ABS Digimatic Indicator
Rp14.533.000
- Kondisi: Baru
- Waktu Preorder: 30 Hari
- Min. Pemesanan: 1 Buah
- Etalase: industri
Brand Name: SYLMOS
DIY Supplies: Metalworking
Max Measuring Range: 0-12.7mm
Dial Indicator Style: Parallel
Display Type: Digital
Accuracy: 0.001mm
Model Number: 543-300B/ID-C112AXB 543-300/ID-C112AX
FEATURES
The new Peak Hold-Type Digimatic Indicator features both a Key-Lock and Parameter-Lock to prevent accidental changing of settings during operation.
Parameter setting software makes it even eay to set all available parameters.
An analog bar provides easy-to-read values when scanning for Max, Min and TIR Values.
The maximum, minimum or runout value can be displayed during measurement.
Go/no-go judgment is performed by setting the upper and lower tolerances for max., min. and runout values.
High speed sampling ratio of 50 times/s.
Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle Absolute Position from the origin when turned on.
Technical Data
Resolution: 0.001-0.01mm or .00005-.0005”/ 0.001-0.01mm Display: LCD
Length standard: ABSOLUTE electrostatic capacitance-type linear encoder
Max. response speed: Unlimited
Measuring force: 1.5N or less
Battery: CR2032 (1 pc.), 05SAA217
Battery life: Approx. 12 months under normal use
IP Rating: Equivalent to IP-42*1
*1 A protection class indication (IP=lnternational Protection) is based on the IEC 60529 /DIN40050 part 1/JIS D0207, C0920. The level indicated is valid only if the output connector cap is installed.
Function
Key Lock, Parameter Lock, PC-USB Input, Analog Bar, Fast measurement frequency, Preset (up to 3 values), Tolerance Judgment , Peak Detection , Calculation (Ax), inch/mm conversion (on inch/metric models only) Counting direction switching, Data Output Alarm: Low voltage, Counting value composition error, Overflow error, Tolerance limit setting error
DIY Supplies: Metalworking
Max Measuring Range: 0-12.7mm
Dial Indicator Style: Parallel
Display Type: Digital
Accuracy: 0.001mm
Model Number: 543-300B/ID-C112AXB 543-300/ID-C112AX
FEATURES
The new Peak Hold-Type Digimatic Indicator features both a Key-Lock and Parameter-Lock to prevent accidental changing of settings during operation.
Parameter setting software makes it even eay to set all available parameters.
An analog bar provides easy-to-read values when scanning for Max, Min and TIR Values.
The maximum, minimum or runout value can be displayed during measurement.
Go/no-go judgment is performed by setting the upper and lower tolerances for max., min. and runout values.
High speed sampling ratio of 50 times/s.
Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle Absolute Position from the origin when turned on.
Technical Data
Resolution: 0.001-0.01mm or .00005-.0005”/ 0.001-0.01mm Display: LCD
Length standard: ABSOLUTE electrostatic capacitance-type linear encoder
Max. response speed: Unlimited
Measuring force: 1.5N or less
Battery: CR2032 (1 pc.), 05SAA217
Battery life: Approx. 12 months under normal use
IP Rating: Equivalent to IP-42*1
*1 A protection class indication (IP=lnternational Protection) is based on the IEC 60529 /DIN40050 part 1/JIS D0207, C0920. The level indicated is valid only if the output connector cap is installed.
Function
Key Lock, Parameter Lock, PC-USB Input, Analog Bar, Fast measurement frequency, Preset (up to 3 values), Tolerance Judgment , Peak Detection , Calculation (Ax), inch/mm conversion (on inch/metric models only) Counting direction switching, Data Output Alarm: Low voltage, Counting value composition error, Overflow error, Tolerance limit setting error
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan