Intel MAX 10 FPGA Development Kit

PRODUK PRE-ORDER - Harga dapat berubah sewaktu-waktu, mohon konfirmasi terlebih dahulu sebelum order. - Tidak bisa cancel setelah order dikonfirmasi. - Estimasi waktu pre-order sekitar 15-45 hari, tergantung dari lamanya pengiriman. - Produk INTEL dijamin original karena kami ambil barang langsung dari official distributor luar maupun dalam negeri. The Intel MAX 10 FPGA Development Kit provides a full featured design platform built around a 50 K logic elements (LEs) Intel MAX 10 FPGA, optimized for system level integration with on-die analog-to-digital converter (ADC), dual-configuration flash, and DDR3 memory interface support. With this development board, you can: Develop designs for the 10M50D, F484 package FPGA. Measure the performance of the Intel MAX 10 FPGA analog-to-digital block conversion. Interface Intel MAX 10 FPGAs to DDR3 memory at 300 MHz performance. Run embedded Linux using the Nios II processor. Interface to daughtercards and peripherals using HSMC and Digilent Pmod compatible connectors. Measure FPGA power (VCC_CORE and VCC_IO) using the power monitor graphical user interface (GUI). Reuse the kit’s PCB board and schematic as a model for your design. Device Intel MAX 10 FPGA (10M50D, dual supply, F484 package) MAX II CPLD – EPM1270M256C4N (On-board Intel FPGA Download Cable II) Features and Connectors Communication ports Two Gigabit Ethernet (GbE) RJ-45 ports One mini-USB 2.0 UART One HDMI video output One universal HSMC connector Two 12-pin Digilent Pmod compatible connectors (see Pmod compatible expansion cards) Analog Two Intel MAX 10 FPGA ADC SMA inputs 2x10 ADC header Potentiometer input to ADC One external 16 bit digital-to-analog converter (DAC) device with SMA output Mini-USB cable for on-board Intel FPGA Download Cable II Switches, push buttons, jumpers, and status LEDs Memory 64Mx16 1 GB DDR3 SDRAM with soft memory controller 128Mx8 1 GB DDR3 SDRAM with soft memory controller