Lime Microsystems LimeSDR Mini 2.0 SDR Software-defined Radio Lime Microsystems LMS7002M Lattice ECP5 LFE5U-45F FPGA

PRODUK PRE-ORDER

- Harga dapat berubah sewaktu-waktu, mohon konfirmasi terlebih dahulu sebelum order.
- Tidak bisa cancel setelah order dikonfirmasi.
- Estimasi waktu pre-order sekitar 15-30 hari, tergantung dari lamanya pengiriman.
- Produk LIME MICROSYSTEMS dijamin original karena kami ambil barang langsung dari official distributor luar maupun dalam negeri.

An open, full-duplex, USB stick software-defined radioIt can be used in conjunction with host computers of varying speed, power dissipation and cost, to fit any air interface, whether narrowband or broadband. The board is designed for the following key features:

Frequency and Bandwidth: The heart of the board is the Lime transceiver RFIC (LMS7002), covering frequencies up to 3.8 GHz with a bandwidth of up to 40 MHz.
Baseband Interface: A significant level of digital circuitry resides within the LMS7002 and accompanying FPGA for the implementation of key physical layer radio functions, including filtering, decimation and interpolation. Interfacing is via USB 3.0.
ApplicationsThe SDR community has has used Lime products for a wide range of applications, such as:

Amateur digital TV broadcast
Satellite ground station
Streaming FM to the Internet
OreSat, Oregon's first satellite
Spectrum-scanning jammer and controller for drones
Bit pattern generator aligned with the SDR data stream
Digital audio broadcast
Since LimeSDR Mini 2.0 has an FPGA with even more logic gates than its predecessors, we expect the number and types of applications to increase accordingly.

SpecificationsRF TRANSCEIVER OPEN MENU

Lime Microsystems LMS7002M
Frequency Range: 10 MHz - 3.5 GHz
RF Bandwidth: 40 MHz
Sample Depth: 12 bits
Sample Rate: 30.72 MSPS
TX Channels: 1
RX Channels: 1
Duplex: Full
Transmit Power: max 10 dBm (depending on freq.)
FPGA OPEN MENU

Lattice ECP5 LFE5U-45F
285-pin csfBGA package
44K LUTs logic capacity
108 sysMEM Blocks (18 Kb)
1944 Kb Embedded Memory
351 Kb distributed RAM
72x 18x18-bit multipliers
4x PLL and 4x DLL
118x IO
FPGA configuration via JTAG
FLASH MEMORY OPEN MENU

128Mb Flash memory for FPGA configuration
CLOCK SYSTEM OPEN MENU

40.00MHz on board VCTCXO
VCTCXO can be tuned by onboard DAC
Reference clock input and output connectors (U.FL)
GPIO OPEN MENU

3x Dual colour (RG) LEDs
8x + 2x FPGA GPIO pin headers (3.3V) (optional)
USB 3.0 CONTROLLER OPEN MENU

FTDI FT601
TEMPERATURE SENSOR OPEN MENU

LM75
CONNECTORS OPEN MENU

USB 3.0 (type A) plug
Coaxial RF (SMA female) connectors
FPGA GPIO headers (unpopulated)
FPGA JTAG connector (unpopulated)
FAN (5V default or 3.3V) connector
DIMENSIONS OPEN MENU

69mm x 31.4mm
POWER OPEN MENU

USB connector (5V)