Microchip Power Debugger ARM Cortex-M SAM AVR Microcontroller

PRODUK PRE-ORDER - Harga dapat berubah sewaktu-waktu, mohon konfirmasi terlebih dahulu sebelum order. - Tidak bisa cancel setelah order dikonfirmasi. - Estimasi waktu pre-order sekitar 15-45 hari, tergantung dari lamanya pengiriman. - Produk ACTIVE-PRO dijamin original karena kami ambil barang langsung dari official distributor luar maupun dalam negeri. Power Debugger is a powerful development tool for debugging and programming AVR microcontrollers using UPDI, JTAG, PDI, debugWIRE, aWire, TPI or SPI target interfaces and ARM Cortex-M based SAM microcontrollers using JTAG or SWD target interfaces. In addition the Power Debugger has two independent current sensing channels for measuring and optimizing the power consumption of a design. Power Debugger also includes a CDC virtual COM port interface as well as Data Gateway Interface channels for streaming application data to the host computer from a SPI, USART, TWI or GPIO source. The Power Debugger is a CMSIS-DAP compatible debugger which works with MPLAB X, Atmel Studio 7 and other frontend software capable of connecting to a generic CMSIS-DAP unit. The Power Debugger streams power measurements and application debug data to Data Vizualiser for real-time analysis. Power Debugger kit contents: Main unit with plastic back-plate 2xUSB cable 10-lead squid cable Flat cable (10-pin 50mil connector and 6-pin 100mil connector) Adapter board (20-pin 100mil connector, 6-pin 50mil connector and 10-pin 100mil connector) 20-pin 100mil jumper cable