Seeed Studio reComputer J3010-Edge AI Device with NVIDIA Jetson Orin Nano 4GB module

PRODUK PRE-ORDER - Harga dapat berubah sewaktu-waktu, mohon konfirmasi terlebih dahulu sebelum order. - Ada harga khusus untuk permbelian banyak, set maupun grosir. - Tidak bisa cancel setelah order dikonfirmasi. - Estimasi waktu pre-order sekitar 15-45 hari, tergantung dari lamanya pengiriman. - Produk SEEED STUDIO dijamin original karena kami ambil barang langsung dari official distributor luar maupun dalam negeri. - Kami juga melayani konsultasi dan pengadaan komponen, sensor, dan lain-lain untuk proyek elektronik anda. reComputer J3010 is a hand-size edge AI box built with NVIDIA Jetson Orin Nano 4GB module which delivers up to 20 TOPS AI performance and has a rich set of IOs including USB 3.2 ports(4x), HDMI 2.1, M.2 key E for WIFI, M.2 Key M for SSD, RTC, CAN, Raspberry Pi GPIO 40-pin and more. It is also equipped with an aluminum case, a cooling fan with a heatsink, and a pre-installed JetPack System. As part of the NVIDIA Jetson ecosystem, reComputer J3010 is ready for your next AI application development and deployment. Jetson Orin Nano System on Module AI Performance reComputer J3011, Orin Nano 8GB - 40 TOPS; reComputer J3010, Orin Nano 4GB - 20 TOPS GPU 1024-core NVIDIA Ampere architecture GPU with 32 Tensor Cores (Orin Nano 8GB); 512-core NVIDIA Ampere architecture GPU with 16 Tensor Cores (Orin Nano 4GB) CPU 6-core Arm Cortex-A78AE v8.2 64-bit CPU 1.5MB L2 + 4MB L3 Memory 8GB 128-bit LPDDR5 68 GB/s (Orin Nano 8GB); 4GB 64-bit LPDDR5 34 GB/s (Orin Nano 4GB) Video Encoder 1080p30 supported by 1-2 CPU cores Video Decoder 1x 4K60 (H.265) | 2x 4K30 (H.265) | 5x 1080p60 (H.265) | 11x 1080p30 (H.265) Carrier Board Storage M.2 Key M PCIe (M.2 NVMe 2280 SSD 128G included) Networking Ethernet 1x RJ-45 Gigabit Ethernet (10/100/1000M) M.2 KEY E 1x M.2 Key E(pre-installed 1x Wi-Fi/Bluetooth combo module) I/O USB 4x USB 3.2 Type-A (10Gbps), 1x USB2.0 Type-C (Device Mode) CSI Camera 2x CSI (2-lane 15pin) Display 1x HDMI 2.1 Fan 1x 4 pin Fan Connector (5V PWM) CAN 1x CAN Multifunctional Port 1x 40-Pin Expansion header 1x 12-Pin Control and UART header RTC RTC 2-pin, supports CR1220 but not included Power Supply 9-19V DC Mechanical Dimensions (W x D x H) 130mm x 120mm x 58.5mm (with case) Installation Desk, wall-mounting Operating Temperature -10℃~60℃ OS Pre-installed Jetpack 5.1.x (above) (provide Linux OS with board support package) Certification FCC, CE, RoHS, UKCA