STMicroelectronics STEVAL-CTM012V1 Evaluation Board 3 Phase BLDC & PMSM Motor Controller STSPIN32F0601Q, STD8N60DM2, 3 Phase BLDC & PMSM Motor Controller, Power Management

Selamat datang di Invok Lab! PRODUK PRE-ORDER - Harga dapat berubah sewaktu-waktu, mohon konfirmasi terlebih dahulu sebelum order. - Estimasi waktu pre-order sekitar 15-45 hari, tergantung dari lamanya pengiriman. - Produk yang kami jual dijamin asli dan original. STMicroelectronics STEVAL-CTM012V1 Evaluation Board 3 Phase BLDC amp; PMSM Motor Controller STSPIN32F0601Q, STD8N60DM2, 3 Phase BLDC amp; PMSM Motor Controller, Power Management High-efficiency 250W compressor solution based on STSPIN32F0601Q and STD8N60DM2. The STEVAL-CTM012V1 evaluation board is a three-phase inverter based on the STSPIN32F0601Q controller which embeds a 3-phase 600 V gate driver and an Arm Cortex-M0 STM32 MCU. The board supports both one-shunt and two- plus one-shunt sensing topology. Can set the shunt topology by opportunely populating a set of jumpers. Evaluation board is compatible with a wide range of input voltages. It includes a power supply stage with the VIPER122 in fly-back configuration that generates +15V and +3.3V supply voltages required by the application. - Complete system solution made by ready-to-use hardware and firmware - Fitting wide range of applications supplied from the mains, rated up to 250W - Market highest efficiency values: inverter effc gt; 96.5% at 3000RPM and COP effc gt; 1.94 at 3000RPM - Based on the STSPIN32F0601Q intelligent three-phase motor controller with embedded STM32 - Power supply based on VIPER122 in fly-back configuration to generate on-board DC voltages - Inverter power stage based on STD8N60DM2 MOSFETs rated 600V and 8A - Equipped with proven sensorless field-oriented control firmware in 1 shunt or 2+1 shunt topology - Suitable for motor control applications