Atur jumlah dan catatan
Stok Total: Sisa 10
Subtotal
Rp5.660.000
Terasic DE10-Lite FPGA Board
Rp5.660.000
- Kondisi: Baru
- Waktu Preorder: 30 Hari
- Min. Pemesanan: 1 Buah
- Etalase: FPGA
PRODUK PRE-ORDER
- Harga dapat berubah sewaktu-waktu, mohon konfirmasi terlebih dahulu sebelum order.
- Tidak bisa cancel setelah order dikonfirmasi.
- Estimasi waktu pre-order sekitar 15-30 hari, tergantung dari lamanya pengiriman.
- Kami bisa bantu klaim garansi ke distributor, namun Invok Lab tidak dapat menanggung biaya kirimnya. Diterima atau ditolaknya klaim garansi adalah 100% keputusan dari distributor.
- Produk TERASIC dijamin original karena kami ambil barang langsung dari official distributor luar maupun dalam negeri.
- Kami juga melayani konsultasi dan pengadaan komponen, sensor, dan lain-lain untuk proyek elektronik anda.
Terasic DE10-Lite is a cost-effective Altera MAX 10 based FPGA board. The board utilizes the maximum capacity MAX 10 FPGA, which has around 50K logic elements(LEs) and on-die analog-to-digital converter (ADC). It features on-board USB-Blaster, SDRAM, accelerometer, VGA output, 2x20 GPIO expansion connector, and an Arduino UNO R3 expansion connector in a compact size. The kit provides the perfect system-level prototyping solution for industrial, automotive, consumer, and many other market applications.
The DE10-Lite kit also contains lots of reference designs and software utilities for users to easily develop their applications based on these design resources.
This board has many features that allow users to implement a wide range of designed circuits, from simple circuits to various multimedia projects. The following hardware is provided on the board:
FPGA Device
MAX 10 10M50DAF484C7G Device
Integrated dual ADCs, each ADC supports 1 dedicated analog input and 8 dual function pins
50K programmable logic elements
1,638 Kbit M9K Memory
144 18 × 18 Multiplier
4 PLLs
Programming and Configuration
On-Board USB Blaster (Normal type B USB connector)
Memory Device
64MB SDRAM, x16 bits data bus
Sensor
Accelerometer
Expansion Connectors
One 2x20 GPIO Connector(voltage levels: 3.3V)
Arduino Uno R3 Connector, including six ADC channels.
Display
4-bit Resistor VGA
Switches/Buttons/LEDs/7-Segment Display
10 LEDs
10 Slide Switches
2 Push Buttons
Six 7-Segments Display
Power
5V DC input
- Harga dapat berubah sewaktu-waktu, mohon konfirmasi terlebih dahulu sebelum order.
- Tidak bisa cancel setelah order dikonfirmasi.
- Estimasi waktu pre-order sekitar 15-30 hari, tergantung dari lamanya pengiriman.
- Kami bisa bantu klaim garansi ke distributor, namun Invok Lab tidak dapat menanggung biaya kirimnya. Diterima atau ditolaknya klaim garansi adalah 100% keputusan dari distributor.
- Produk TERASIC dijamin original karena kami ambil barang langsung dari official distributor luar maupun dalam negeri.
- Kami juga melayani konsultasi dan pengadaan komponen, sensor, dan lain-lain untuk proyek elektronik anda.
Terasic DE10-Lite is a cost-effective Altera MAX 10 based FPGA board. The board utilizes the maximum capacity MAX 10 FPGA, which has around 50K logic elements(LEs) and on-die analog-to-digital converter (ADC). It features on-board USB-Blaster, SDRAM, accelerometer, VGA output, 2x20 GPIO expansion connector, and an Arduino UNO R3 expansion connector in a compact size. The kit provides the perfect system-level prototyping solution for industrial, automotive, consumer, and many other market applications.
The DE10-Lite kit also contains lots of reference designs and software utilities for users to easily develop their applications based on these design resources.
This board has many features that allow users to implement a wide range of designed circuits, from simple circuits to various multimedia projects. The following hardware is provided on the board:
FPGA Device
MAX 10 10M50DAF484C7G Device
Integrated dual ADCs, each ADC supports 1 dedicated analog input and 8 dual function pins
50K programmable logic elements
1,638 Kbit M9K Memory
144 18 × 18 Multiplier
4 PLLs
Programming and Configuration
On-Board USB Blaster (Normal type B USB connector)
Memory Device
64MB SDRAM, x16 bits data bus
Sensor
Accelerometer
Expansion Connectors
One 2x20 GPIO Connector(voltage levels: 3.3V)
Arduino Uno R3 Connector, including six ADC channels.
Display
4-bit Resistor VGA
Switches/Buttons/LEDs/7-Segment Display
10 LEDs
10 Slide Switches
2 Push Buttons
Six 7-Segments Display
Power
5V DC input
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan