Terasic Starter Platform for OpenVINO Toolkit PCIe based FPGA Card

PRODUK PRE-ORDER
- Harga dapat berubah sewaktu-waktu, mohon konfirmasi terlebih dahulu sebelum order.
- Tidak bisa cancel setelah order dikonfirmasi.
- Estimasi waktu pre-order sekitar 15-30 hari, tergantung dari lamanya pengiriman.
- Kami bisa bantu klaim garansi ke distributor, namun Invok Lab tidak dapat menanggung biaya kirimnya. Diterima atau ditolaknya klaim garansi adalah 100% keputusan dari distributor.
- Produk TERASIC dijamin original karena kami ambil barang langsung dari official distributor luar maupun dalam negeri.
- Kami juga melayani konsultasi dan pengadaan komponen, sensor, dan lain-lain untuk proyek elektronik anda.

Starter Platform for OpenVINO Toolkit is a PCIe based FPGA card with high performance and competitive cost. It's equipped with the largest Cyclone V GT（or GX）device at 301K LE and it supports PCIe Gen 2 x4(GX device will support PCIe Gen 1 x4). The board comes with 1GB DDR3, 64MB SDRAM, UART-to-USB interface, and extension headers such as GPIO and Arduino. This makes Starter Platform for OpenVINO Toolkit a re-configurable platform with adequate computing performance and low power consumption.
The package of Starter Platform for OpenVINO Toolkit includes reference designs for all the peripherals onboard. It also has a detailed user manual for developers to follow and start building up a system according to their needs immediately.
The Starter Platform for OpenVINO Toolkit is a perfect starting point as OpenCL HPC (High Performance Computing) development platform. It supports Intel FPGA OpenCL BSP for developers to design a system with high level programming language. The computation demanding tasks can be off-loaded from CPU to FPGA, resulting in significant system performance improvement.

FPGA Device

- Cyclone V 301K Programmable Logic Elements13,917 Kbits embedded memoryEight Fractional PLLsTwo Hard Memory ControllersNine Transceivers (the GT speed is 6.144G, and GX speed is 3.125G )

Configuration and Debug

- Quad Serial Configuration device-EPCQ256

- On-Board USB Blaster II (Mini-B USB connector)

Memory Device

- 64MB (32M x16) SDRAM

- 1GB (2 x256M x16) DDR3 SDRAM

Communication

- UART to USB（Mini-B USB connector）

- GT device supports PCIe Gen2x 4(GX device supports PCIe Gen1x 4)

Expansion I/O

- 2 x40 GPIO Header36 General GPIO PinsSupport 8 pairs LVDS TX and 8 pairs LVDS RXDiode protection circuitConfigurable I/O standards: 1.5/1.8/2.5/3.3V

- One Arduino Uno Revision 3 Expansion HearderAnalog ADCSPI Interface500Ksps Sampling RateEight ChannelsAnalog Input Range：0 ~ 4.096 VResolution: 12-bitDigital IODiode protection circuit

- SMA IN/OUT 3.3V single port

Switches, Buttons, LED, and 7-Segments

- 5 User Buttons (4 normal buttons, one CPU_RESET_n)

- 4 User Switches

- 4 LEDs

- 2 7-Segments

Power

- 12V DC input

- PCIe 12V Input

Cooling

- 12V, 5000 Speed Fan