Atur jumlah dan catatan
Stok Total: Sisa 2
Subtotal
Rp300.000
AS606 Green Light Optic Fingerprint Reader syno chip original scanner
Rp300.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Sensor and Tranducer
note:
diwajibkan membeli packing tambahan kardus,
apabila tidak ditambahkan packing kardus,
kami tidak menenrima komplain
link packing kardus
----------------------
https://www.tokopedia.com/isee/packing-kardus-buble-wrape
Sangat compatible untuk Arduino..
Mendukung Library Adafruit Fingerprint Sensor sudah kami coba.
Make adding fingerprint detection and verification super simple.
Typically used in safes--there's a high powered DSP chip that does the image rendering, calculation, feature-finding and searching.
Connect to any microcontroller or system with TTL serial, and send packets of data to take photos, detect prints, hash and search.
You can also enroll new fingers directly - up to 162 finger prints can be stored in the onboard FLASH memory.
There's a red LED in the lens that lights up during a photo so you know it is working.
Specifications:
Supply voltage: DC 3.8-7.0V
Operating Current: 65mA
Peak current: 95mA
Fingerprint image time: 1 .0 seconds
Window area: 14.5*19.4 mm
Signature File: 256 bytes
Template files: 512 bytes
Storage capacity: 1000
False Accept Rate (FAR): 0 .001% (security level 3)
False Reject Rate (FRR): 1 .0% (security level 3)
Search time: 1 .0 seconds (1: 500 average)
PC interface: UART (TTL logic level)
Baud rate (UART): (9600*N)bps (N=1~12, N default 6, equal 57600bps)
Working environment: Temperature: -20 C to 50 C
Relative Humidity: 40% RH to 85% RH (non-condensing)
Storage Environment: Temperature: -40 C to 85 C
Relative humidity: 85 % H (no condensation)
Lighting: Long light/Flashing
Dimensions (L* W* H): 56*20*20.5mm
Package includes:
1 x Fingerprint Recognition
1 cable dan konektornya seperti gambar
data sheet masuk ke website resmi dfrobot.com
ini linknya: https://www.dfrobot.com/wiki/index.php/SEN0188_Fingerprint
https://learn.adafruit.com/adafruit-optical-fingerprint-sensor/downloads
diwajibkan membeli packing tambahan kardus,
apabila tidak ditambahkan packing kardus,
kami tidak menenrima komplain
link packing kardus
----------------------
https://www.tokopedia.com/isee/packing-kardus-buble-wrape
Sangat compatible untuk Arduino..
Mendukung Library Adafruit Fingerprint Sensor sudah kami coba.
Make adding fingerprint detection and verification super simple.
Typically used in safes--there's a high powered DSP chip that does the image rendering, calculation, feature-finding and searching.
Connect to any microcontroller or system with TTL serial, and send packets of data to take photos, detect prints, hash and search.
You can also enroll new fingers directly - up to 162 finger prints can be stored in the onboard FLASH memory.
There's a red LED in the lens that lights up during a photo so you know it is working.
Specifications:
Supply voltage: DC 3.8-7.0V
Operating Current: 65mA
Peak current: 95mA
Fingerprint image time: 1 .0 seconds
Window area: 14.5*19.4 mm
Signature File: 256 bytes
Template files: 512 bytes
Storage capacity: 1000
False Accept Rate (FAR): 0 .001% (security level 3)
False Reject Rate (FRR): 1 .0% (security level 3)
Search time: 1 .0 seconds (1: 500 average)
PC interface: UART (TTL logic level)
Baud rate (UART): (9600*N)bps (N=1~12, N default 6, equal 57600bps)
Working environment: Temperature: -20 C to 50 C
Relative Humidity: 40% RH to 85% RH (non-condensing)
Storage Environment: Temperature: -40 C to 85 C
Relative humidity: 85 % H (no condensation)
Lighting: Long light/Flashing
Dimensions (L* W* H): 56*20*20.5mm
Package includes:
1 x Fingerprint Recognition
1 cable dan konektornya seperti gambar
data sheet masuk ke website resmi dfrobot.com
ini linknya: https://www.dfrobot.com/wiki/index.php/SEN0188_Fingerprint
https://learn.adafruit.com/adafruit-optical-fingerprint-sensor/downloads
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan