4.2/ 5.0
80% pembeli merasa puas
5 rating • 2 ulasan
5(4)80%
4(0)0%
3(0)0%
2(0)0%
1(1)20%
Atur jumlah dan catatan
Stok Total: 12
Subtotal
Rp99.000
2.4 inch TFT LCD Touch Screen Module For Arduino
Rp99.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: RF - KOMPONEN PARTS
- Produk terbaru 2024-
2.4 Inch 2.4" TFT Color LCD Touch Screen Display Module HD 320*240 ILI9341 Driver For Arduino UNO R3 Mega2560 Development Board
Dapat diletakkan di atas Arduino Uno dan dilengkapi dengan lcd layar sentuh yang dapat mendeteksi jari tangan atau stylus.
** FREE STYLUS
1. 2.4" diagonal LCD TFT display
2. Bright, 4 white-LED backlight, on by default but you can connect the transistor to a digital pin for backlight control
3. Colorful, 18-bit 262,000 different shades
4. 4-wire resistive touch screen
5. 8 bit digital interface, plus 4 control lines
6. Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3 and analog 4 and
5 Pin 12 is available if not using the micro SD
7. 5V compatible, use with 3.3V or 5V logic
8. For Arduino UNO R3
9.Resolution: 240X320
10.Driver IC: ILI9341
Product introduction:
*Support direct plug-in of for Arduino UNO and Mega2560 development boards, without wiring
*320X240 resolution, clear display effect, support touch function
*Support 16 bit RGB 65K color display with rich display colors
*8-bit parallel bus, faster than serial SPI refresh
*Onboard 5V/3.3V level conversion IC, compatible with 5V/3.3V working voltage
*With SD card slot for easy expansion experiment
Product parameters:
Display color: RGB 65K color
Type: TFT
Driver chip: ILI9341
Resolution: 320 * 240 (Pixel)
Module interface: 8-bit parallel interface
Effective display area: 48.96 * 36.72 (mm)
Module PCB size: 72.20 * 52.7 (mm)
Working temperature: - 20 ℃~60 ℃
Storage temperature: - 30 ℃~70 ℃
Working voltage: 5V/3.3V
Power consumption: TBD
Interface Definition: Please check the latest slide (Slide terakhir)
Untuk diskusi via WA/SMS Only : 081310808073
2.4 Inch 2.4" TFT Color LCD Touch Screen Display Module HD 320*240 ILI9341 Driver For Arduino UNO R3 Mega2560 Development Board
Dapat diletakkan di atas Arduino Uno dan dilengkapi dengan lcd layar sentuh yang dapat mendeteksi jari tangan atau stylus.
** FREE STYLUS
1. 2.4" diagonal LCD TFT display
2. Bright, 4 white-LED backlight, on by default but you can connect the transistor to a digital pin for backlight control
3. Colorful, 18-bit 262,000 different shades
4. 4-wire resistive touch screen
5. 8 bit digital interface, plus 4 control lines
6. Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3 and analog 4 and
5 Pin 12 is available if not using the micro SD
7. 5V compatible, use with 3.3V or 5V logic
8. For Arduino UNO R3
9.Resolution: 240X320
10.Driver IC: ILI9341
Product introduction:
*Support direct plug-in of for Arduino UNO and Mega2560 development boards, without wiring
*320X240 resolution, clear display effect, support touch function
*Support 16 bit RGB 65K color display with rich display colors
*8-bit parallel bus, faster than serial SPI refresh
*Onboard 5V/3.3V level conversion IC, compatible with 5V/3.3V working voltage
*With SD card slot for easy expansion experiment
Product parameters:
Display color: RGB 65K color
Type: TFT
Driver chip: ILI9341
Resolution: 320 * 240 (Pixel)
Module interface: 8-bit parallel interface
Effective display area: 48.96 * 36.72 (mm)
Module PCB size: 72.20 * 52.7 (mm)
Working temperature: - 20 ℃~60 ℃
Storage temperature: - 30 ℃~70 ℃
Working voltage: 5V/3.3V
Power consumption: TBD
Interface Definition: Please check the latest slide (Slide terakhir)
Untuk diskusi via WA/SMS Only : 081310808073
Ada masalah dengan produk ini?