Atur jumlah dan catatan
Stok Total: Sisa 10
Subtotal
Rp301.370
Pilihan Sparepart Unggulan Dinamo Brushless Motor 12V 18000 rpm With Hall 16mm (8396) - moto Best
Rp301.370
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Motor
brand new 16mm inner rotor brushless motor in stock, with a Hall brushless motor. The motor diameter is 16mm, and the body length is 23.1mm. The interior is actually an outer rotor structure covered with a casing. In this y, the torque can be increased compared to the inner rotor motor. High torque.
If you use a 12V voltage to adjust the potentiometer to the maximum overspeed, it will be protected. If you use a voltage of about 8V to test the maximum, it will not be protected. The maximum speed of 8V is about , and the torque is also very good.
The motor weighs approximately 17.5 grams.
Driver
This brushless driver board can drive micro 3-wire or 4-wire Hall-less brushless motors such as hard disk brushless motors and optical drive brushless motors. The driver board has voltage reverse protection and overcurrent protection. The driving support voltage is between 5-12V. Work, with a short-circuit cap to switch forrd and reverse. The forrd and reverse must be switched when stopped to be effective. The maximum driving current is 1.2A.
How to identify the common port of a 4-wire motor Use the resistance of a multimeter*1 to measure the four terminals respectively. If one terminal has the smallest and equal resistance value with the other three terminals, then this terminal is the COM terminal, which is the common terminal.
brand new 16mm inner rotor brushless motor in stock, with a Hall brushless motor. The motor diameter is 16mm, and the body length is 23.1mm. The interior is actually an outer rotor structure covered with a casing. In this y, the torque can be increased compared to the inner rotor motor. High torque.
If you use a 12V voltage to adjust the potentiometer to the maximum overspeed, it will be protected. If you use a voltage of about 8V to test the maximum, it will not be protected. The maximum speed of 8V is about , and the torque is also very good.
The motor weighs approximately 17.5 grams.
Driver
This brushless driver board can drive micro 3-wire or 4-wire Hall-less brushless motors such as hard disk brushless motors and optical drive brushless motors. The driver board has voltage reverse protection and overcurrent protection. The driving support voltage is between 5-12V. Work, with a short-circuit cap to switch forrd and reverse. The forrd and reverse must be switched when stopped to be effective. The maximum driving current is 1.2A.
How to identify the common port of a 4-wire motor Use the resistance of a multimeter*1 to measure the four terminals respectively. If one terminal has the smallest and equal resistance value with the other three terminals, then this terminal is the COM terminal, which is the common terminal.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan