Behringer MS8000 8-Channel Microphone Splitter Behringer MS-8000

Harga untuk 1 unit

Behringer MS8000 8-Channel Microphone Splitter
The ULTRALINK MS8000 from Behringer is an eight-channel microphone splitter suitable for recording consoles, monitoring systems, interfaces, and more. It features eight XLR inputs and sixteen XLR outputs, with each input automatically split into two outputs—one pre-transformer and one post-transformer—in order to feed different types of gear. Press any link button on the front panel and one input will be routed into four outputs, allowing you to send a vocal mic to the FOH console, a recording interface, in-ear monitors, and a broadcast truck, all at the same time. Furthermore, this unit features ground lift switches to eliminate hum on every channel, as well as phantom power on eight of the sixteen outputs.

Specification

Analog Audio Inputs
Connectors 8x XLR inputs
Impedance 1 kOhm, balanced
Maximum Input Level 30 dBu at 1 kHz
Controls 4x Link
8x Lift/Ground
Analog Audio Outputs
Connectors Link: 8x XLR outputs, parallel to inputs
Direct: 8x XLR outputs
Voltage Transformation Ratio 1:1.12
Impedance 2.7 kOhms, balanced
Maximum Output Level 38 dBu at 1 kHz
System
Frequency Response 30 Hz to 30 kHz (±0.5 dB at +4 dBu)
THD+N 0.02% at 1 kHz, input level +4 dBu
Signal to Noise Ratio 104 dBu
CMRR >80 dB, typical
Insertion Loss +8 dB at 100 kOhms
-5 dB at 600 Ohms
Power Requirement Passive
Dimensions & Weight
Dimensions (H x W x D) 1.7 x 19.0 x 2.6" / 44 x 483 x 65 mm