Tool F2S Flight Controller with M8N GPS XT60 Galvanometer for FPV

F2S Flight Controller with M8N GPS XT60 Galvanometer for FPV craft Semua Produk Di Toko Kami PO (Personal Pre-Order) 7-10 Hari Tergantung Stok Dan Posisi Gudang. Harap Chat Terlebih Dahulu Sebelum Order Atau Anda Setuju Dengan Waktu Pre-Order Yang Kami Tetapkan Secara Default 15-Hari F2S Flight Controller with M8N GPS XT60 Galvanometer for FPV craft New F2S flight controller is improved. The power supply is optimized, support directly 2S-6S to supply power to flight control. The accyracy of galvanometer is optimized, the tolerance is almost zero. The satellite can be found when starting for 2s. Description: Input signal: - Aileron channel - Horizontal tail channel - Throttle channel - Mode selection channel Output signal: - Aileron (no craft aileron received vertical tail actuator) - Horizontal tail channel - Throttle channel (connected to the power transfer) - 4 channels output, connect to one side of the V tail craft, not for the common craft types . (Before GPS is not positioned, the three switch control is all balanced mode, only receiving more than 6 stars, can be converted to other control mode. 1. Balance mode: Three stage switch, high position. The craft is responsible for the posture that relative to the ground . To achieve the level of flying craft flying. 2. Lock mode (above version 2.0): three stages switch,middle position Lock mode is the aileron channel or pitch channel, when the rocker to midpoint, flight control automatically lock direction or the height of the mode, more than the midpoint, and turninto a balanced mode. Such a lock mode, you can achieve a fixed high directional flight, set high non directional flight, the direction of the high altitude flight, balance mode, very convenient. 3. Return mode: three stages switch, low position. Automatic return.The throttle is decided by receiver throttle and the lowest throttle. If the receiver is out-of-control ID-1059807