Tool Holybro Kakute F7 V1.5 Flight Controller & Atlatl HV V2 VTX &

Holybro Kakute F7 V1.5 Flight Controller amp; Atlatl HV V2 VTX amp; 4 PCS 65A BL_32 Tekko32 F3 Metal ESC Combo Semua Produk Di Toko Kami PO (Personal Pre-Order) 7-10 Hari Tergantung Stok Dan Posisi Gudang. Harap Chat Terlebih Dahulu Sebelum Order Atau Anda Setuju Dengan Waktu Pre-Order Yang Kami Tetapkan Secara Default 15-Hari Holybro Kakute F7 V1.5 Flight Controller amp; Atlatl HV V2 VTX amp; 4 PCS 65A BL_32 Tekko32 F3 Metal ESC Combo Specification: Brand Name: Holybro Tekko32 F3 Metal ESC Model: Tekko32 F3 Metal Item Name: 65A BL_32 DS1200 ESC Quantity: 4 PCS Con. Current: 65A Peak Current: 80A Input Voltage: 3-6S Lipo Support Ext. cap needed for 6s (220uf 35v for 6s usage.) - F3(M4 Core) MCU, Runs BLHELI32 firmware, the MCU works at 108Mhz - Mosfet tested at 4S 65A, under props, nothing cove for 1min - Onboard WS2812B LED Size: 18 x 27 mm Weight: 4.4g/PC Kakute F7 V1.5 AIO ( Manual) Item Name: F7 Flight Controller AIO OSD BEC and Current Sensor MCU: STM32F745 32-bit processor IMU: MPU6000 (SPI) Barometer: BMP280 Current Sensor: Approximately 130 amps maximum measurable value USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART) 6 hardware UARTS (UART1,2,3,4,6,7) All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”. Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported. TF card for Blackbox logging Dimensions: 35x48x7mm (includes foam-mounted gyro board in height) Mounting Holes: Standard 30.5mm square to center of holes Weight: 11.2g Atlatl HV V2: Item Name: 5.8G 40CH 25/200/500/800mW FPV Transmitter Model: Atlatl HV V2 Transmitting Output Power: 25mW/ 200mW/ 500mW/ 800mW Switchable Audio: 6 MHz + 6.5 MHz Mono Antenna Connector: MMCX Input Voltage: 7-28V (2-6S Lipo) Dimension: 35(L)x 25(W)x 7(H)mm Mounting Hole: 30.5x30.5mm Weight: ID-1414807