Tool MAVLink Wifi Bridge 2.4G Wifi Telemetry Module with

MAVLink Wifi Bridge 2.4G Wifi Telemetry Module with Antenna for Pixhawk APM Flight Controller Semua Produk Di Toko Kami PO (Personal Pre-Order) 7-10 Hari Tergantung Stok Dan Posisi Gudang. Harap Chat Terlebih Dahulu Sebelum Order Atau Anda Setuju Dengan Waktu Pre-Order Yang Kami Tetapkan Secara Default 15-Hari MAVLink Wifi Bridge 2.4G Wifi Telemetry Module with Antenna for Pixhawk APM Flight Controller Instruction: It support Mobile Computer and can replace the 3DR data transmission module and free you from the limitation of USB cable. It is suitable for all flight control with TTL interface. Specification: Module: FCC compliant Wifi standard: 802.11 b/g/n Frequency Range: 2.4G-2.5G (2400M-2483M) Size: 18.5 x 26mm Suitable For: Pixhawk, APM2.5/2.6, Mini APM Version: APM Version/ Pixhawk Version APM Version is with APM, Mini APM Flight Controller Pixhawk Version is wiht Pixhawk Flight Controller Transmit power: - 802.11 b: +20dBm - 802.11 g: +17dBm - 802.11 n: +14dBm Receive power: - 802.11 b: -91dBm (11Mbps) - 802.11 g: -75dBm (54Mbps) - 802.11 n: -72dBm (MCS7) Connect data: - SSID: ALPHAUAVLINK - e: alphauavlink - Ground stataion IP: 192.168.4.1 - Protocol: UDP - Braud: 921600 Usage: For PIXHAWK: 1. If connected to Serial1/Telem1 these parameters should be set on the flight controller (if using another telemetry port, replace the “1” in the parameter name with the telemetry port’s number): 2. SERIAL1_PROTOCOL = 2 (MAVLink2) or 1 (MAVLink1) 3. SERIAL1_BAUD = 921 (921600 baud) 4. If you have problems connecting, it may help to set BRD_SER1_RTSCTS = 0 to disable flow control although this is not normally necessary Connecting from a Ground Station. 5. On your PC, open the wifi network connections screen and select the wifi access point (normally “ALPHAUAVLINK” or “alphauavlink”) 6. On the ground station, set ID-1428590