Tool SIM7020C NB-IoT Expansion Board Full Netcom Module Support for

SIM7020C NB-IoT Expansion Board Full Netcom Module Support for Arduino LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS Semua Produk Di Toko Kami PO (Personal Pre-Order) 7-10 Hari Tergantung Stok Dan Posisi Gudang. Harap Chat Terlebih Dahulu Sebelum Order Atau Anda Setuju Dengan Waktu Pre-Order Yang Kami Tetapkan Secara Default 15-Hari Feature: Onboard Raspberry Pi interface, can be directly inserted into any version of Raspberry Pi Support LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS and other protocol communications Support domestic OneNET/telecom cloud/aira cloud platform Onboard USB interface, can be used for power supply or software debugging Lead out UART control interface, can be used to connect Arduino/STM32 and other main control boards Onboard level conversion circuit, the default is 3.3V work, can be set to 5V by jumper cap Onboard SIM card slot, supporting China Telecom/Unicom/Mobile NB-IoT special card Onboard 2 LED indicators, easy to check the running status of the module Support serial port baud rate range: 300bps ~921600bps (default 115200bps) Support AT command control (V.25TER, 3GPP TS 27.007 and SIMCOM AT command set) Support for Raspberry/Arduino/STM32/Python, etc. Communication parameters: Support frequency band FDD-LTE B1/B3/B5/B8 data transmission Uplink: ≤62.5Kbps Downstream: ≤26.15Kbps short message Text and PDU mode (must be supported by the NB card) Applicable area Asia (Domestic NB-IoT Netcom) Parameter: Power supply voltage: 5V Logic level: 5V / 3.3V (default is 3.3V) Current consumption of the whole machine (idle mode): about 18mA Current consumption of single module (VBAT=3.3V): Product size: 30.5mm x 65.0mm Idle mode: 5.6mA Sleep mode: 0.4mA PSM mode: 5uA eDRX mode current: 70uA (eDRX=655.36s) Documents: Schematic: to open Sample tutorial: to open SIM7020 Instructions: For the latest version of the document, please go to the official SIMCOM download Package includes: 1 x SIM7020C NB-IoT ID-1706874