Atur jumlah dan catatan
Stok Total: 28848
Subtotal
Rp950.180
AIYIMA 6J1 Tube Amplifier Bile Preamplifier HIFI Preamp jemStRe
Rp950.180
- Kondisi: Baru
- Waktu Preorder: 20 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
AIYIMA 6J1 Tube Amplifier Bile Preamplifier HIFI Preamp jemStRe
Kami Bisa Menyediakan Barang yang Anda atau Perusahaan Butuhkan, Terutama yang tidak ada di Indonesia.
- Pengiriman 6-15 Hari.
- Semua Produk Berkualitas dan ready.
- Bisa request order jika ada tipe/barang yang diinginkan.
- Bisa dapat harga spesial.
Brand Name : Aiyima
Origin : CN(Origin)
Maximum Power Per Channel : NO POWER
Model Number : 6J1 Tube Amplifier Bile Preamplifier
Package : Yes
Channels : 2 (2.0)
Product description:
Chips: NE5532+6J1tube
Treble adjustment: ±6db
Bass adjustment: ±10db
Power supply: DC12V/1A ，more than 12V will burn out the diode.
Frequency response range: 20Hz-20kHz (±3db)
Distortion: ≤0.3%
Input sensitivity:0.2mV
SNR:≥101dB
TND:0.1%
Control:Potentiometer knob and toggle switch
Audio input/ Audio output:Gold-plated RCA
Preamp gain:5 times
Size: 118.5*98*33MM
Operation steps:
1. Make sure the VOL knob is at its minimum.
2. Insert the supplied tube into the tube holder in the direction (the tube does not matter, check whether the loweris deformed before installing the tube, and the deformation can be reversed by hand).
3. Connect the audio source you want to use to the audio input connector.
4. Connect the rear-end device that needs an external connection to the audio output connector.
5. Connect the DC12V power supply.
6. Turn the switch on and off to turn it on.
7. Turn the knob clockwise to select the desired volume level and high and low volume.
Product questions:
1. All the lines are connected, but there is no sound output?
1. Check if the POWER indicator is on. If it is not lit, turn the switch on. After pressing the power button, the indicator light still does not light up. At this time, you can find an equivalent voltage output (must be 12V) and test
ELEELC32604
Kami Bisa Menyediakan Barang yang Anda atau Perusahaan Butuhkan, Terutama yang tidak ada di Indonesia.
- Pengiriman 6-15 Hari.
- Semua Produk Berkualitas dan ready.
- Bisa request order jika ada tipe/barang yang diinginkan.
- Bisa dapat harga spesial.
Brand Name : Aiyima
Origin : CN(Origin)
Maximum Power Per Channel : NO POWER
Model Number : 6J1 Tube Amplifier Bile Preamplifier
Package : Yes
Channels : 2 (2.0)
Product description:
Chips: NE5532+6J1tube
Treble adjustment: ±6db
Bass adjustment: ±10db
Power supply: DC12V/1A ，more than 12V will burn out the diode.
Frequency response range: 20Hz-20kHz (±3db)
Distortion: ≤0.3%
Input sensitivity:0.2mV
SNR:≥101dB
TND:0.1%
Control:Potentiometer knob and toggle switch
Audio input/ Audio output:Gold-plated RCA
Preamp gain:5 times
Size: 118.5*98*33MM
Operation steps:
1. Make sure the VOL knob is at its minimum.
2. Insert the supplied tube into the tube holder in the direction (the tube does not matter, check whether the loweris deformed before installing the tube, and the deformation can be reversed by hand).
3. Connect the audio source you want to use to the audio input connector.
4. Connect the rear-end device that needs an external connection to the audio output connector.
5. Connect the DC12V power supply.
6. Turn the switch on and off to turn it on.
7. Turn the knob clockwise to select the desired volume level and high and low volume.
Product questions:
1. All the lines are connected, but there is no sound output?
1. Check if the POWER indicator is on. If it is not lit, turn the switch on. After pressing the power button, the indicator light still does not light up. At this time, you can find an equivalent voltage output (must be 12V) and test
ELEELC32604
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan