Atur jumlah dan catatan
Stok Total: 173
Subtotal
Rp270.000
Terlaris! New Arrival! New 50ml Loctite 601 638 640 680 Cylindrical Parts Holding Glue High
Rp270.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: perlengkapan
Selamat datang di toko kami, produk kami import dr luar negeri kami membutuhkan waktu 20-30hr pengiriman, silahkan diorder kak!!
Application Materials : Metal
is_customized : No
Model Number : 601/603/680/620/609/638/648
Origin : Mainland China
Certification : NONE
Type : Caulk
Type of hot melt adhesive : Anaerobic adhesive
e life : 3 (min)
Classification of resin gum : Acrylic glue
Packing specification : 50ml
Tips for use:
Before sizing, it is recommended to use Loctite SF7365 component cleaner to clean the components.
Lotte SF7365 part smoothing agent is a general-purpose part cleaning agent suitable for metal and plastic.
This product removes most oil, grease, lubricants, metal shavings and drying residues.
If the cylinder is used in an environment below 15, it is recommended to use loctite 5F7649 ator in ce.
Locite SF7649 ator will not significantly reduce the bonding strength when increasing the curing rate of anaerobic adhesive and sealant.
It is especially suitable for the application of inert metal surfaces or inert working surfaces with large bonding gaps.
Features:
Product name: Loctite 601 cylinder holding adhesive
Net capacity: 50ml
Color: Green
Viscosity (mPa) s) : 125
Maximum filling clearance (mm):0.05
Shear strength (PSI):3770
Initial curing time: 30 minutes
Full curing time: 24 hours
Relative density: 1.1
Typical use: low viscosity is suitable for small clearance, with clearance less than 0.05mm below the cylindrical parts of the fastening operation, a variety of metal materials have a good bonding effect.
Product name: Loctite 603 cylinder holding adhesive
Net capacity: 50ml
Color: Green
Viscosity (
Application Materials : Metal
is_customized : No
Model Number : 601/603/680/620/609/638/648
Origin : Mainland China
Certification : NONE
Type : Caulk
Type of hot melt adhesive : Anaerobic adhesive
e life : 3 (min)
Classification of resin gum : Acrylic glue
Packing specification : 50ml
Tips for use:
Before sizing, it is recommended to use Loctite SF7365 component cleaner to clean the components.
Lotte SF7365 part smoothing agent is a general-purpose part cleaning agent suitable for metal and plastic.
This product removes most oil, grease, lubricants, metal shavings and drying residues.
If the cylinder is used in an environment below 15, it is recommended to use loctite 5F7649 ator in ce.
Locite SF7649 ator will not significantly reduce the bonding strength when increasing the curing rate of anaerobic adhesive and sealant.
It is especially suitable for the application of inert metal surfaces or inert working surfaces with large bonding gaps.
Features:
Product name: Loctite 601 cylinder holding adhesive
Net capacity: 50ml
Color: Green
Viscosity (mPa) s) : 125
Maximum filling clearance (mm):0.05
Shear strength (PSI):3770
Initial curing time: 30 minutes
Full curing time: 24 hours
Relative density: 1.1
Typical use: low viscosity is suitable for small clearance, with clearance less than 0.05mm below the cylindrical parts of the fastening operation, a variety of metal materials have a good bonding effect.
Product name: Loctite 603 cylinder holding adhesive
Net capacity: 50ml
Color: Green
Viscosity (
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan