5.0/ 5.0
100% pembeli merasa puas
13 rating • 5 ulasan
5(13)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: Habis
Subtotal
-
EZDIY ARGB Multi Angle Vertical GPU Mount PCIe Gen 4 VGA RTX Gen4 RGB - Black ARGB
Rp897.321
Pilih warna dan argb: Black ARGB
Stok varian ini habis. Simpan di Wishlist untuk diingatkan ketika barang kembali tersedia.
Halo dan selamat datang di lapak ane!
Mau jual vertical graphics card holder dari EZDIY yang ada opsi ARGB.
Menggunakan sistem magnet di bagian bawah casing jadi tidak perlu khawatir memotong/melepas pcie cover dibelakang.
Tingkat kemiringan GPU bisa diatur.
Sudah mendapatkan ARGB LED 5V 3 pin yang bisa diatur menggunakan motherboard connector.
Berfungsi untuk showcase graphics card anda dan meningkatkan airflow.
Tersedia juga aksesoris EZDIY-FAB lainnya yah.
Silahkan chat untuk info lebih lanjut.
Terima kasih telah berkunjung!
---
• The adjustable GPU bracket allows to show off their GPUs and enhance cooling efficiency by mounting it vertically, or at an angle between 0 and 45 degrees, on the PSU shroud or any metal plane.
• GPU Bracket with ARGB LED lighting effects, Synchronizable ARGB lighting via motherboard (AURA, Mystic, Fusion):Support M/B 3 Pin ARGB Header (5V, D, G), Please note : Not Support 4pin RGB header (+12V, G,R,B), 12 volts can destroy LED.
• The base bracket is equipped with a strong magnet, which can make the bracket stable on the PSU shroud
• Supports most 1, 2, and 3 slot graphic cards, high quality metal material increases structural toughness and supports the large graphics card on the market.
• Featuring Gen4 riser cable, supports PCIE 4.0/3.0/2.0/1.0,Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800.
• Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount.
• Please refer to length spec image and confirm that there is enough space of your chassis.
Mau jual vertical graphics card holder dari EZDIY yang ada opsi ARGB.
Menggunakan sistem magnet di bagian bawah casing jadi tidak perlu khawatir memotong/melepas pcie cover dibelakang.
Tingkat kemiringan GPU bisa diatur.
Sudah mendapatkan ARGB LED 5V 3 pin yang bisa diatur menggunakan motherboard connector.
Berfungsi untuk showcase graphics card anda dan meningkatkan airflow.
Tersedia juga aksesoris EZDIY-FAB lainnya yah.
Silahkan chat untuk info lebih lanjut.
Terima kasih telah berkunjung!
---
• The adjustable GPU bracket allows to show off their GPUs and enhance cooling efficiency by mounting it vertically, or at an angle between 0 and 45 degrees, on the PSU shroud or any metal plane.
• GPU Bracket with ARGB LED lighting effects, Synchronizable ARGB lighting via motherboard (AURA, Mystic, Fusion):Support M/B 3 Pin ARGB Header (5V, D, G), Please note : Not Support 4pin RGB header (+12V, G,R,B), 12 volts can destroy LED.
• The base bracket is equipped with a strong magnet, which can make the bracket stable on the PSU shroud
• Supports most 1, 2, and 3 slot graphic cards, high quality metal material increases structural toughness and supports the large graphics card on the market.
• Featuring Gen4 riser cable, supports PCIE 4.0/3.0/2.0/1.0,Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800.
• Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount.
• Please refer to length spec image and confirm that there is enough space of your chassis.
Ada masalah dengan produk ini?