BARU 480W 8A 0-60V Adjustable Switching Power Supply HJS-480-0-60 DC voltage regulated SMPS with Digital Display 110220VAC

480W 8A 0-60V Adjustable Switching Power Supply HJS-480-0-60 DC voltage regulated SMPS with Digital Display 110220VAC


**Mohon Chat/Noted Untuk Warna Dan Type Yang Tersedia **



- Semua Barang di Kirim Dari Luar Negri

- Estimasi 14-20 Hari Sampai Alamat

- Harga sudah termasuk biaya ongkir dr China to Jakarta + Biaya Pajak

- Seller Amanah, Packing Aman dan Secure



-Terima Kasih Sudah Berbelanja & Jangan Lupa Follow Toko Kami
Output Current : 8A
Output Frequency : 47-63Hz
Model Number : HJS-480-0-60
Output Type : single
Output Power : 480W
Output Voltage : 0-60V Adjustable
Input voltage : AC110/220VAC
Product size : 21.5CM (long) *11.5CM (wide) *5CM (high)


Specifications
Product: 0-60V 8A power supply 0-5V signal control voltage
Input voltage: AC110/220V
Output voltage: DC0-60V 8A
Rated power: 480W
Product size: 21.5CM (long) *11.5CM (wide) *5CM (high)

The protection function of short-circuit / overload / overvoltage
full load burn-in test
Input voltage & frequency range ----------110/220VAC/47 ~ 63Hz
Start impact current ---------------20A@120VAC (cold start)
The output range of - + (rated output voltage)
Overload protection -------------------105 (rated load), self recovery
Overvoltage protection -------------------115 (rated output voltage)
Short circuit protection ------------------- self recovery
Output start time - 2S@120VAC 1.0S@230VAC
Output hold time - more than 10mS@120VAC, more than 20mS@230VAC
The insulation strength ------------------- input - output: AC1500V, 1min
Input - Case: AC1500V, 1min
Output - Case: DC500V, 1min
Theenvironment of C - 10 to 50 DEG C; 20RH (no condensation)
EMC standard - EN55022 Class B reference design;
EN61000-4-2/-3/-4/-5/-6/-11

Description
1. Mainly used in a variety of DC equipment, DC motor stepless speed regulation, LED electrodeless dimming, chemical plating, speed control, scientific research, testing, students, etc., and widely used.

2. Please Note: no matter the voltage is set to several V, the maximum current is 8A, the current is not adjustable, the actual current is determined by the load). Any device less than 8A current can be used, and no device greater than 8A current can be used

3. Special note: such as the use of motor and fan inductive load, please note that the maximum motor starting current parameter, this parameter may not be higher than the current maximum power, otherwise it may cause damage to the power supply, the power supply should choose more current, or to the motor with soft start protection circuit to absorb impact current.

4. To ensure the lifetime of the power supply, pls don't use full load when you use it. We recommend the use power should be 80=400W

5. (power formula) voltage X current = power
For example: access to 20V 6A equipment, power is 120W, and then connected to 48V 5A equipment, power is 240W

Precautions:
When the charger is used, please unplug the battery and turn off the input power. If it is not used for a long time, please store it in a ventilated and dry environment.

To ensure safety, please perform within the line of sight when charging. If you need to leave, remove the battery to avoid unpredictable danger.

Do not mix batteries of different types, different capacities and different manufacturers.

Keep away from flammable materials when charging, pay special attention to battery temperature. If the temperature is very high, such as , please disconnect the power immediately to stop charging.

Do not drop wires or other conductive objects into the charger. The consequences are self-sufficient.

Do not charge if the battery leaks, rises drum, peels off, changes color, or deforms.

Do not try to charge a non-rechargeable battery.

Do not exceed the charging range specified by the battery manufacturer.

Do not modify or disassemble the charger. Turning on the machine and indicating that you have waived all warranty and technical